A LARGE 3D Printer...That Just Works? | Creality Ender-3 V3 PLUS

Well, I liked the Ender-3 V3 and this is just...a Bigger version! Let's take a look at the new V3 PLUS! A Large format Core XZ printer boasting some fast speeds!

▼ MENTIONED IN VIDEO

▼ SOCIAL MEDIA / CONTACT

▼ SUPPORT THE CHANNEL!

▼AFFILIATE AND DISCOUNT CODES!

☞ Check here for Up to Date Discounts and Codes!

☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!

☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!

☞ Visit Bambu for a variety of FDM 3D printers, from entry
level to advanced!

☞ Use Code “FBT20” at checkout for 40% off awesome
3D models and files!

☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!

☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!

Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!

Thank you for supporting me!

▼TIME STAMPS

#3dprinting #Creality #review

[dylanshields]

I have the ender 3 v2 plus. Is my first and only printer. It’s been a fantastic learning experience on how to actually get it working good. Very frustrating at times and very rewarding when it goes well. I think I’ve got mine in a good place right now. Prints well with only brim and good z seam quality. Stringing is something I need to figure out how to fix I’ve got a dryer and an enclosure to keep temp consistent but still stringing a lot.

[Levkin]

Black might not focus well, but it’s really good for seeing layer lines, and see how well these printers actually print. Please don’t stop using it :)

[Andre_M_D]

Great video Franky. I have 4 printers and my favorite by far is my k1. I rooted mine and with the ability to use mainsail and all the available options, it is an amazing printer. I find it to be the most reliable printer as well. I have way over 1000 hours and Creality has been great. I broke my front door by mistake and they sent me a replacement right away. So I can't complain.

[daremona]

As far as the Neptune series of printers go I present you with my own story: I bought the 4 max in April of this year and started pumping out mark 85 pieces. I was also printing out smaller print in place pieces as gifts. The printer lasted about 3 months before going bonkers. I agree with your thoughts on klipper. I hate it personally. I got in touch with elegoo support and after exchanging several emails the sent me a free brand new motherboard. I love elegoo. I still dream about a K1max though.

[Printsbynick]

I’m looking into buying one of these in the next couple months. I’ve been really impressed with their K1 SE and V3 XZ.

[gangleweed]

Oh my when I thought it was the last word for economical printers with clout like the Ender 3 V3 SE along comes this one with more bells and whistles blowing and clanging for all their just received my Ender 3 V3 SE today and it's still in the box waiting to get and BTW, I like the presentation very muchly .... it has real excitement and those prints are jointed dragon is out of this etc.
Also, this will be my very first attempt at 3D printing....I already have the first Ender 3 printer with a few upgrades installed but haven't used it and will sell in on as a new item on Ebay or wherever.

[mrgtoyz]

Love ya Frank but I'm never buying Creality again. When they work they're fine and when they don't it's aggravating. I've been working on my K1 all week because it got a bad clog. Had to replace the motor, heat block and one of the tension cable plates because that broke somehow. Then I was getting a weird line in the center of the prints because the belt tension is off. Tried updating the firmware and it just bricked the whole printer. Meanwhile I've had like 10 Elegoo 3 Pros and a P1P for almost a year and rarely had any issues with them. I just don't trust Creality anymore.

[dvdganon]

They should make a feature in the slicer that slowing the print when you get above certain height. And acording to the geometry

[danielmills]

dude, the cardboard cutout got me rolling lol!

[tattoobill]

Bro I just got the k1c thank you so much for getting me into 3d printing it's my favorite thing I ever done

[chrisstepper]

Love the videos I've had the v3 plus for a few months and have had really good results especially since they dropped the new slicer software, also heard that the new CFS system will be compatible with it and the k1s

[DeanosRides]

Always been a fan of your videos and your videos have helped me out many times with various prints,
I have been using my little CR6SE for the past 3 or so years and just love this printer. Yes, I have modded and frankensteined it so much, but it just does what I need.
But now I need something that won't break the bank, but has a large print bed.

I have to say, I've been eyeing this printer for a while, but after watching this video, I'm a bit worried because you kinda do say go for it, but then you don't...
And the K1 Max is just way out of my price range for now.

So do I or don't I?

Oh, I also want to be able to slap my Pi with Octoprint on it! This is a MUST HAVE!
I don't want Creality spying on my prints and networks... 🤣🤣🤣

[andyman]

Excellent, thanks for that perfectly timed review. It is like you knew I was on the Creality site looking at new printer options last night! I will strongly consider that Ender 3 V3 for my next unit... I do have one question; Do you have a video, or general recommendations on what to do with older printers that are not being used any more?

[TravisRamage]

I got this printer a few weeks ago. Works great for small prints. I'm having issues with bed adhesion in the front left corner. Can't seem to fix the leveling manually.

[AxtonLabs]

Great video ✌🏼 Big up Frank, he is the reason I’ve got a 3D printer & probably thousands of other people 🔥 Respect ✊🏼

[jasonax]

I have the 3 V3 and it is a workhorse. The only issue I have had with it is when you pause the print to change the filament, or pause the print job for an extended period of time, the filament tends to snap off inside the extruder just below the gears.

[mikemike]

I like the large build plate. That dragon would never be printed for my kids. I couldn't imagine stepping on that thing early in the morning after waking up.

[DandTeePrinting]

I love mine but man does it squeal at low speeds. Found I had to slow down the top layers because it was set too fast when Orcaslicer first released it. The Creality 5.1 has a really good one which I copied over to Orca and have been using that with slight tweaks to my liking. The Neptune 4 Plus was plagued with firmware drama on launch. Took me 2 months to finally tune it in and install replacement parts for parts that arrived damaged on the printer.

[Oramister]

Im such a big fan of you ive been saving for a neptune 3 max!

[yatsen]

Just what is not included to start printing right away. Is there anything Ill need to get. They offer two different add on kits are they needed? and if so which 1 Thanks for your time love your content