EFI Gas Tank Installation! CPP Side Fill Tank! 1965 Chevrolet C10! 1963-1972 Chevy Truck Rear Mount

20-gallon capacity
Aluminum construction
255lp/h pump supports up to 600hp!
Can be used with FiTech, Holley, or Edelbrock fuel injection kits as well as LS swaps
Fits between the frame rails
Fully baffled
.187-thick mounting brackets (thickest on the market)
Includes 90-ohm sending unit (correct for original 67-72 fuel gauges)
Side-fill application (includes filler hose, clamps, and adapter)
Includes all mounting hardware, fittings, and plugs
Does not include cap or filler door
Kit Includes:
20-gallon side-fill fuel tank
90-ohm sending unit
58psi Corvette-style regulator/fuel filter
255lp/h fuel pump (supports up to 600hp)
25 feet of high-pressure fuel injection hose
(1) 3/8" fuel filter feed line fitting
(1) 5/16" fuel filter/regulator return line fitting
(2) 3/8" female to -6AN male straight filter fittings
(2) 1/4" NPT to -6AN male fuel pump pickup and return line adapters
(2) 45-degree -6AN female to 3/8" hose fittings
(6) straight -6AN male to 3/8" hose fittings
Side-fill installation kit
This complete fuel injection gas tank conversion kit comes with everything you need to modernize your fuel system on your 63-72 Chevy or GMC truck and includes a brand new all aluminum 20 gallon EFI fuel tank, EFI fuel pump kit with installation accessories including a complete fuel line kit and sending unit. The fuel line kit includes 25-feet of properly rated fuel injection hose and all the correct fittings to plumb your fuel lines from the fuel pump forward along with a 58psi fuel pressure regulator/ filter that is perfect for anybody dropping an LS into their vehicle or who happen to be running an aftermarket fuel injection unit. All the fittings feature a reusable spin-lock connector that does not require specialty tools to disassemble. The sending unit is adjustable and will fit 6-24" deep fuel tanks and will work with 6-24V electrical systems as well as negative or positive ground systems too. The FI fuel pump can support up to 600 horsepower and are quiet and reliable and a must for your fuel injected engine. This tank also includes a side fill installation kit but does not include the cap or filler door. The complete conversion will not only allow you to upgrade your classic truck to EFI, these tanks will relocate your fuel from out of the cab to the rear frame.

[daviddaniels]

You are very professional in your design and I am impressed with the details and clean look. Great job !

[Dr.Frankenstein]

Gonna be a cool ride. I did my side fill with a 69 Charger fill cap. Staying tuned to watch this build👍

[kelvincarolinaboilawton]

I would have went higher so I could put a lift in there.

[selina]

So what did you plum up ?was that a fuel filter are external fuel pump?