2006 Honda Odyssey Front Brake Pad Replacement - (Anyone can do this!)

Just a quick video showing how easy it is to replace the Front Brake Pads on a 2006 Honda Odyssey.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man

This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.

As an Amazon Associate I earn from qualifying purchases.
All other links are affiliate as well if possible meaning that I earn a small commission from anything you purchase.

[joseangelrosas]

Your somebody that works smarter not harder love your technique keep it up

[graceu]

I watched quite a few yt videos on here and nobody did it this way or this easy...way to go man...quick and easy, thanks a million...

[quindaro]

I normally don't write comments, I get the info and leave but you were on point especially with pushing the caliper in with the screwdriver. Thanks you saved me about 250.00 or more.

[stevegrossheim]

Well done! Made it look easy and it was!

[cayladaniels]

crazy question but I am literally broke. I have an 06 odyssey & the brakes are grinding super bad. they're really loud. is there a temporary fix to this ? something I can easily do to make the loud noise go away ? I can buy the brake pads but can't afford to pay someone to put them on. also don't have the tools to do it myself nor do I trust myself to do it. pls help ! any advice is helpful ! thank you.

[Brain_quench]

What are the jack points you used for your stands and how did you avoid asbestos exposure?

[TLEE]

Is this the same process for rear odyssey brakes and should you use anti-seize on the caliper bolt?

[donwhitt]

It's a good idea to check the fluid level in the brake fluid reservoir before you push the pistons back in. If it's too full, brake fluid will run over, and you don't want that on painted surfaces. I'm about to do mine with Bosch pads. The instructions say it's CRITICAL that you also replace the supplied hardware clips. What do you think?

[sagitariojahm]

blue thread locker is suppose to use there?

[glencoe]

Do you have to turn the Calipers in a certain way with a certain tool ? Or is that just the newer ones ?

[Joelaurencechannel]

Are the back brakes the same??? I have to do them all.

[alsdock]

Great video Dan. Is slider grease required?

[gaileenfrost]

Thank you so much because some men not all men take advantage of women

[brianshefchek]

Um u are supposed to replace the rotors when doing this. If u don't it can cause a lot of vibration when breaking. Why didn't u replace them

[infamousbanter]

~FOOD FOR THOUGHT~
Except if you have dirty brake fluid and you push it back up into your master cylinder you can ruin it. (The master cylinder)
you're supposed to unscrew the bleeder on the caliper when you press the Piston back..

[HagerVids]

am i the only one who has trouble placing pads into sliders without a fight?

[lambertj.]

Great video! Horrible background music.