Threadlocker Application Tips: Permatex Tech Tip Series

Curtis Haines, Permatex Associate Innovations Manager, discusses the different types of repairs an auto technician may need to perform, and the different types of Permatex threadlockers and thread sealants that can help complete the job. This video also provides a step-by-step guide to applying threadlocking compounds.

Featured Products:

Please call 1-87PERMATEX (1-877-376-2839) or fax [phone] with any questions or comments.

[ilserpente]

I use this on my snowboard binding screws. Works like a charm!

[noureddineelaroussi]

You answered all my questions, and I thank you sir!

[davidostring]

Good information. Thanks for posting this video.

[miguelsalami]

Guy's Please Be Extremely Careful not to get this threadlocker in your mouth while applying in a upside down position, It Will cause Lock Jaw! 🤓

[CarsSimplified]

An engine I am rebuilding has a bolt that goes through a coolant passageway, and the GM recommends using an RTV gasket maker to ensure that this bolt properly seals. I am assuming no threadlocker should be used in addition to that, but I was curious what you guys think.

[wayne]

Don't forget your helmet and fire suit. Also use caution tape around the work area. If your skills are a little shaky, you might want to use crime scene tape.

[trellatkins]

Thanks for the tip. Now I know which one is best for my application 👍✔

[devilxdude]

yeah I mean... I always wear eye protection when applying thread locker, gimme a break lol

[briangray]

The blue thread lock I just bought seems really watery even after I shook it up. It looks nowhere near as thick as the blue in this video.

[lukaszM]

is there a thread sealant that activates more like glue, so that i can position my brass fittings in the direction required, which a lot of the time means they are not fully tightened?
It is said in this video that these thread-lockers are activated when tightened down, so that no air is present (anaerobic), so i assume that's not what i am looking for?

[danephillips]

I have abolt on my car that striped .Wonder will this work to keep bolt tight

[ericprice]

Will the heat from the engine melt the blue threadlocker??

[BrendonHoppy]

Pedro Sanchez (Spain's présent PM) does exactly the same as Curtis with his hands when he talks😂😂😂😂😂

[Linoge]

what threadlocker should I use for the metal coolant drain bolt? it keeps leaking, rtv doesn't help

[heartysteer]

I don't understand the Surface Prep activator. You say at 1:02 that the parts have to be assembled "before the activator cures". What if the parts are difficult to assemble? For the High Temperature Sleeve Retainer it says the part can be heated for assembly, but the activator says max temp 120. It's not making sense. What if I clean the parts with acetone?

[JCcanU]

Mineral Spirits Acetone clean it off as well .

[artbykeenan]

I USED THE RED ON MY CALIBER BRACKET BOLTS, SHOULD I BE WORRIED ABOUT GETTING THEM OFF AGIN?

[robertmccall]

Shits like water .... he shows it like paste ...

[redriver]

your chin. Thanks for the info though.