How to mix and spray automotive basecoat

I show how I mix and spray automotive basecoat. Using Speedo-Kote base, urethane reducer, LiME LiME disposable cups and 1.3 basecoat/clearcoat gun.Thanks for watching.


Join this channel to get access to perks:

Be sure to check out my other custom paint tutorials.

follow me on these fine social media outlets.
Instagram : @timewarpcustompaint
Tik Tok: @timewarpcustompaint

Join this channel to get access to perks:

[kizito]

It all depends on how you mix and the experience you have spraying. I wish there was a step-by-step video on how to use the Fuji Semi-pro 2 for different paint types. The last silver paint and clear I used left bubbles in the bumper I sprayed at home. It cured over time but I was not happy with how it came out.

[deigo]

Referencing video ... going to do my 1st base coat ever .. now ... 🤞

[leonardmein]

I'm on the verge of giving up spray painting. Getting fed up with fine line tape lifting paint or leaving raggy edges. Then you double back to repair the job only for the tape to pull more paint off.

[RubenRodriguez-bozs]

And I appreciate you making a video thanks Adam peace out

[mopricefam]

Why you using medium reducer at 95 degrees ambient temp

[TennTom_Times]

Dude!
I had a question about suggested reducer rate. You gave your preference within 10 seconds.
Thanks!!!

[jamesrobertson]

If im spraying waterbased basecoat do i need to mix it with reducer?? And whats the mix ratio??

[emmanuelphillip]

Ummm. Do some paints use hardener as well?

[deigo]

Adam ... does silver base not typically cover very well .. maybe I'm doing something wrong... switch to white after 4 coats of metallic silver and primer still showing

[pbassassinz]

Question you said mix the base coat 1 to 1 I bought that base coat it says mix like 3-1 is 3-1 to thick or what?

[irtbcoo]

what psi are you spraying at? are you setting psi at air compressor? I see you don't have a regulator at the gun. I have your lime line gun and was wondering if I need to attach a regulator if I can just set it at the compressor. thanks. your vids are helping me prepare for my first real paint job

[jacobydavis]

How do you dust on the 1st coat of base? Moves fast?

[justinOUTDOORSandDIY]

a 1.7 or close tip is for primer, sealer and base. a 1.3 / 1.4 is for clear so not sure why you would say don;t use a bigger tip for a base coat