How To SR5 Cluster Swap - 3.4 Swap Tach Resistor Mod - Toyota Pickup / 4Runner (4K)

How to install a SR5 / 4Runner gauge cluster in your 89-95 Toyota Pickup!! My Pickup us 3.4 swapped, and in this video I show you how to do the 10ohm resistor mod for the tachometer to work with your swaps!!

Camera Gear Used To Make This Video:

Thank you for watching my videos! If you enjoy what you see please leave me a like, comment, and subscribe to my channel for more great content!

Weekly uploads, every Wednesday!

[DirtGarage]

Thanks for watching! Remember if your not 3.4 swapped like me you dont need to do the 10ohm resistor mod.

[jordanshara]

Awesome. Love that your truck has a red interior too. Mine is a 90 4x4 22RE metallic red on red. Red interiors on these trucks apparently pretty rare

[TheSamsonizzle]

Wow man, your channel is AMAZING. I am going to be eating up a lot of these videos. This gave me a great starting point for my cluster swap for my '93 T100.

I am, however, a bit lost about things like that digital display you have. Also, I saw in another video that you somehow got OBD2 into this truck and I am just missing so much contextual knowledge on all of that. Can you suggest any resources for learning about things like that?!?!

[David]

Will this work for 4 cylinder, RE engine?

[SpeedyCorky]

glazed right over how you unhooked the speedo cable from the rear of the cluster !

[varmint]

So I just did a 2rz swap in my 86 4Runner and ordered a “ gauge” style sender but my oil gauge gos up to 3/4 just turning my key on and stays there 😊

[matexfc]

I have a question if anyone can give me insight. I did this cluster swap I got mine out of a 1994 T100 yes they fit the 92-94 pickups as long as it’s electric they have cable driven one too but anyways. With the original stock cluster temperature would stay really low id move about a few inches from the cold line. After the cluster swap the temp gauge goes half way.

[carlosguox]

Hola me puedes ayudar tengo un 22r modeló 93 sencillo extracab pero la aguja del reloj de presión de aceite no sube y ya le puse tres bulbos que sera

[jonathanhubbard]

Can I tap into that black wire to install an aftermarket tach? Or does it only work if I use another oem gauge cluster?

[rdybhjhbehb]

How come the tach adjustment knob doesn't work for the 3.4 swap?

[JamesSmith-gxyp]

What’s up I have a 94 Toyota with a dual coil 3rz swap. just swapped a sr5 cluster in and I don’t know where to run the tach wire to my motor. Thanks

[adryanryvera]

Hello friend, a pleasure to greet you from Honduras. I tell you that we have carried out the project to change the engine of a 1995 4runner with 3vz to a 5vz 3.4 almost everything goes well but when assembling the tachometer it does not mark the revolutions because we have not connected the wiring for it, with these indications it should work the revolutions?

[Jursaw]

Hey man I just bought a 1993 pickup with a 3.4l swap but that thing needs a lot of work. Does your shift lever sit towards the left side? Also does your truck shake when you let go of the clutch and its starting to grab?

[zacharynewcomb]

Hey man I have 89 I am about to swap out the gauge cluster and I am not sure if my truck was pre wired for the tach however previous owner put in an after market tach and oil pressure gauge. But not sure if I need to do the ten ohm like you had to with your truck...

[nicholaspitman]

I just about got my 3.4 swap complete, I would like to install that same oil sending unit, before I put the motor back in. I'm swapping clusters just like your video. Is that a 3.0 sending unit?

[bigpilouh]

Do I need to add the oil presuse sensor in a Toyota pick up 91? I just got a cluster like yours. Thanks in advance.

[tylermccorkle]

So how would hook up the tach on my 4.3 chevy swap 91 sr5 pickup? Advanced adapters has a pretty thorough guide for the major aspects of this swap but they leave out some of the finer details. When talking about the tach they just say "when swapping a gm v6 your tach should work without modifications" but that doesn't tell me how to hook it up! Haha

[adriangonzales]

I have the 22re engine would the work if i swap the tech from a V6 4runner???

[jerryriggins]

I have a 2wd 22re with a electric speedometer and no tach is it possible to do this swap

[carloscorrea]

Yo tengo un 22re y le pondre el cluster con tacometro. Pero no se de que valor poner la resistencia. Puedes ayudarme con eso