How to drill out a lock #shorts #diy #handyman

if you find yourself needing to drill out a lock it's not difficult to do you just need to know where to drill you're going to go just next to the keyhole on the side where the pins are that's the side that the key teeth are on you make a small pilot hole with a small drill bit and then you'll be switching to a larger drill bit to drill out the pins themselves once you have drilled out all the pins you'll be able to unlock the door with a flat head screwdriver and just like that you're in

[RoscoReviews]

Here is a links for the full tutorial

How to drill out a lock FAST

[SkyManagement]

This is a great skill for everyone to know!

[yeahboiii]

thanks, my neighbor's couch is so comfy 😂

[Grammapama]

You are lifesaver. My upstairs neighbor was selling his unit. The agent locked a lock just like this. No key. Then his hot water heater was leaking into my unit. Voila you are a lifesaver

[randyaivaz]

Lock was installed Upside Down, In US, We Have Pins at Top, Some Other Countries, Have Pins at the Bottom, Better at the Top, So if a Spring Fails, pin can drop to Shear Line.

[bobpospick]

Thanks! Got locked out of the roll-up garage door (only way to get in). Key has been gone for a long, long time. Drilling it out saved me a call to the lock$mith.

[jbiasutti]

That door opens outwards! That means that the pins for the hinges are accessible. Just knock out the pins and remove the door.

[wavy]

I was trying to rob my neighbors house and couldn’t figure out how to use my lockpick set from Amazon thanks dude.

[Lefty_Locks]

The side where the key teeth are? Have no idea what you're talking about. Basically what you're doing here is targeting what we call the shear line which is where the key pins and driver pins located at the top of the lock (the bible) meet. Not all locks drill this easy, you need to keep a set of cobalt bits around. Many residential locks are even drill resistant with hardened plates and pins so don't go at it with HSS or titanium. You can also target the mounting screws which is most locksmiths go to.

[rosco]

This works on dead bolts the same way.

[mr.nobody]

Why is it on every single video I look up on this all the door knobs are upside down? Are they supposed to be like this?

[sufisarmin]

Can it will work on desk drawer lock ???...plzz reply the lock from upside... Plzz help my documents stucks there!!

[ilikeoldelpaso]

What about for a double sided wafer lock? Where do I drill?