DIY Front suspension with differential and steering gear

In this exciting video, we will show you how to make your own front suspension with differential and steering gear. This is a project that will interest any car enthusiast, mechanic, or just a creative person who likes to experiment with mechanisms.

The video starts with a short introduction where we talk about the necessary materials and tools to complete this project. After that, we move on to step-by-step instructions for each step of the process.

First, we'll explain how to choose the right differential and steering gear for this project. Ensuring that these components are correctly matched is important to ensure that your front suspension performs optimally.

After that, we will show you how to correctly measure and cut the necessary pipes for the suspension structure. Using the right tools, we will teach you how to make accurate measurements and cuts so that all the components fit into place.

The next step will be to assemble the front suspension. We will explain the sequence of attaching components, installing shock absorbers and springs. During this process, we'll show you some helpful tips and tricks to help you make the most of your build.

Finally, we will move on to connecting the differential and steering gear. We will talk about the necessary fasteners, connecting rods and their settings. You will learn how to ensure the correct functioning of the steering and movement of the car.

Once the assembly is complete, we will demonstrate how the front suspension works in action. You will see how the car is able to move, turn and adapt to the bumps in the road thanks to this custom made suspension.

This video is a great source of information and inspiration for anyone who wants to make their own front suspension with differential and steering. With it, you'll gain the confidence and knowledge you need to tackle this exciting project.

#suspension #differential #steeringgear

[pufnguo]

Шикарно! Раньше с такими навыками открывали кружки моделирования, прививали детям с детства интерес к механике, машинам, производству. Дети к совершеннолетию уже отлично понимали, кем они хотят стать в своей жизни.

[MrDimmon]

Чувак явно на АвтоВАЗе работал, у моей "Десятки" так же руль трясется и люфтит, как будто собран из туевы хучи линеек и зубочисток!

[clintdenman]

Bro this is absolutely amazing i don't care what anyone else says but my son is working on this project at the moment and learning about gearing and how the systems work this can actually be applied to anything and anyone who has a clue would or could learn.

[BadChizzle]

It’s beautiful. Thank you for the fun of watching. It should be on display somewhere for people to view. Next to it you could have a simple video of it in use, so it isn’t worn out from too much time running.

Thanks again.

[Tarantula]

Не многие поймут сколько нужно усилий чтобы такой стенд сделать. Однозначно лайк.

[smnv]

Если бы ещё ход подвески был это вообще огонь было бы, а так топ

[vlsh]

Спасибо. Раньше я думал, что видел все этапы сборки АвтоВАЗа, но... оказывается я что то пропустил)

[mixsmat]

Сделай пожалуйста полноценный перед, Двигатель все такое с тормозами вместе и коробкой передачи. Пожалуйста
Очень нравятся твои видео!!!!

[Hobbipro]

Чуть-чуть осталось до полноценного Автомобиля ;)

[Digitalchirppy]

அருமை, சிறப்பு, என் மனமார்ந்த பாராட்டுகள்
Awesome, Super, my heartiest compliments.

[KUNIGOROU-FUJINO]

I watch it in Japan. The mechanism of the front engine and the front drive was very easy to understand and understood. A tribute to those who invented differential gear.

[standardannonymousguy]

I'm considering a simple 4 wheeled electric car build. To simplify the build, I'd use a handlebar steering system and mountain bicycle front suspension for the suspension most likely. However if my build only goes 27 MPH, then maybe I would just have it be completely ridged. Nice work, it's cool that you can do so much with just wood.

[Nitrosyan]

да это же ШЕДЕВР!
не ну реально круто с меня лайк!

[jamesandrew]

Really appreciate you showing the end product first. Nice work!

[jaimeandrescatano]

Great project!!! at the end of the video i played with .25 speed, is clear how the differential works. Thanks for sharing :)

[youssefbounou]

Fascinating work my man, can't believe that there is a type of people who wouldn't appreciate this and dislike it they probably better off watching something like a new booty video clip or a smartphone drop test or any other type of garbage that's circling YouTube

[tor]

*Это вам не мыло по тазику гонять, а потом в ютуб выкладывать.Это круто!!!*

[ikcvmqq]

Очень наглядная картина работы дифференциала, молодцы!!!

[AntonyCamper]

Работа подвески так и не была продемонстрирована! Только работа колес и рулевого механизма. Запиши ролик с демонстрацией доработанной рабочей подвеской на этом же механизме. Удачи, Кулибин! ))

[dmxumrrk]

Спасибо, очень хорошо сделано и наглядно.