Hackintosh OS installation guide for beginners

preview_player
Показать описание
This is a step by step Hackintosh OS installation guide for beginners. Hopefully you guys who is new to Hackintosh find this useful, and hopefully this video helped you guys to build up your confidence.

Thanks to all the information in Hackintosh community, without the knowledge provided by the community this video would not be possible. please go and check it out.

Hackintosh Communities:

Hardware in this video:
MB: Gigabyte Z97M-DS3H mATX rev1.0

Please share the video if you liked it, and don’t forget to subscribe for future video update.

Рекомендации по теме
Комментарии
Автор

Mr. TaoM, Excellent video. I have used it to install Sierra and High Sierra in my Hackintosh. There is one thing which is important: In Disk Utility, both when you prepare or erase the USB to use with Unibeast, and when preparing the Hard Drive to install the macOS, make sure you select the main device (SandDisk in your example) not the volume (Untitled). To do that, in Disk Utility, click on View on left upper corner and select Show All Devices (instead of Show Only Volumes) then you can select Scheme GUID Partition Map (otherwise you cannot do that). In the video it appears correctly when installing the macOS.

gpubvhi
Автор

Great help tried 4 times using forum guides then saw this vid and it worked first time, thank you

buddymarvelous
Автор

That was amazing info! Thanks for taking the time to do this video. :)

dbot
Автор

Thank you, your tutorial is a great help for me. Finally got my machak going after many tries.

ssarasary
Автор

Really great video very clear and informative thank you for this video all others are very complex to a new comer but you really explained it in a down to earth way

wildcoyote
Автор

Good job and keep up the good work! Best wishes.

GordonBraicks
Автор

thanks for the tutorial :) i have a ausu ROG maximus VII board with a 4790K haswell processor and a gtx750 video card on it sitting in a coolermaster case with a dual core radiator thats not being used. im going to give the hackintosh a shot. i would certainly have missed unmounting the sierra install volume. thanks again

skippyi
Автор

I have workstation with Dual Xeon 2690v2 paired with a asrock C602 workstation server board
Is this gonna be a hackintosh compatable hardware

kabeersulfi
Автор

BTW, It is amazing that I cannot play Rise of the Tomb Raider in my mid 2012 MacBook Pro (not supported) but it runs smoothly in my Hackintosh made in a PC I bought in 2010!.

gpubvhi
Автор

hi, I have a Hackintosh with OsSierra. I tried to make a Bootable USB with High Sierra, using UniBeast, but I can't begin installation, because my Pc sees only Clover in USB. The same thing happens if I use the terminal or other USB creator.Any ideas?

zemi
Автор

I have a problem about HDMI connection.
My desktop hardware configuration are:
CPU I5-4590
Motherboard Asus B85-PLUS R2.0
Discrete Graphic: Colorful Nvidia 960 2G
System: macos high sierra 10.13.3

Ok. I have installed it with my idle monitor 19'.and connected VGA to DP to discrete graphic .The installation have successed.
and I changged the monitor to an new 27' inch monitor with HDMI connection directly(host to discrete graphic).But when the verbose mode run finished.The monitor goes blank.display no signal.

and i have download the NvidiaGraphicFixUp.kext to patch.

jacobjhschow
Автор

hi mate, everytime I try installing a hackintosh onto my new pc i have trouble at the last stage I finally select the drive I am to boot from which is the macintosh hd and then the screen loads with the apple screen and then the bar loads for 3/4 of the way and then the screen flashes and then goes black and then say that there is no hdmi input although there is an input. this happens every single time and the same problem always happens at the same stage of installation. please could you help

altanozyagci
Автор

I7 9700f
Z390 d
8gb
Gtx 1050ti
It will work??
Plz help me..

vctelugugamer
Автор

I got everything to where you open MultiBeast, after installing and saving the MultiBeast settings I chose quick start, the internet driver and audio, usb. Install and restart, but when it booted up, it won’t get pass the Apple logo

macloud
Автор

Would you be able to make a tutorial for the 5820k?

User
Автор

just good tutorial. then this tutorial can be match with:
CPU: i7-6700k
Memory: 24Gb
NVIDIA GeForce GTX 1050
can i install to my pc ?

webstar
welcome to shbcf.ru