6.2.1.7 Packet Tracer - Configuring VLANs

This video shows the Packet Tracer Activity Configuring VLANs from CCNA Routing and Switching Module-2

[apanecbr]

FOR UPDATED WITH VOICE:
First on S1 go to Config Terminal, while adding the initial vlans, also add:
interface vlan 150
name VOICE


For the second part:
Go to S3
Config t
interface fastethernet 0/11
switchport voice vlan 150


Should be good to go.

[noname-ylgg]

Dude, srsly, youe videos are SAVING my life. Thank you so much for your time and effort you put in your videos. I highly appreciate them!

[Noobish_Camper]

I love the videos. You speak clearly, zoom in on what you are doing, and explain everything thoroughly.

[jeredtrzebiatowski]

thank you for taking time to make these videos, the help immensely in my studies

[Vincentberepele]

Step by step progression clear. I love this.

[brindamourgallina]

Thank you so much!!! I was struggling and now that you explained it it makes sooo much more sense!

[SphericallyChallenged]

Fantastic video's you are the first person I look for. Takes a lot of time and effort to make these, thanks very much sir.

[michaelowen]

Thank you for working through the activities one step at a time and answering the questions. Great job!

[Evil_StoneCrew]

Wonderful work, no words to describe how much you help with these videos, keep up your great work!!! Thanks!!

[TheHeywoodkenobi]

For those of you looking for the updated version:
vlan 10
name Faculty/Staff

vlan 20
name Students
vlan 30
name Guest(Default)
vlan 99
name Management&Native
vlan 150
name VOICE

Step 3 on S3

interface f0/11
mls qos trust cos

switchport voice vlan 150
end

[GameNon-Quitters]

Fantastic exercise (Lab) ! Keep going !

[Nalllyyy]

Hey man your videos are amazing thank you so much :)

[rainbowdash]

Great work as always. Thanks for the explanation.

[raypashoukos]

Another great video. Just an FYI, they added a IP phone between S3 and PC4 in their newest version of this PT activity. Thank you as always :)

[rokku]

You have been such a wonderful help. Thank you for your time and effort it is much appreciated.

Once again Very good -Video - Dziękuję

[yeshanjayasundara]

please recheck, new pak activity is with voice vlan

[carlosdasilva]

In my test I must connect thre switches to another switch, each in a specified vlan.

I already created the vlans and assigned the ports on each, the issue though is that only the port on the lower switches will turn green, meaning there is NO connection between the main switch and the other two. What am I doing wrong?


Also, the main switch is connected to a router but that is not an issue for the test, it is actually the least difficult part.

[roseyish]

Thank you so much, this was so helpfull

[eyegofaster]

Hi, please can you help me, I can not find the continuations of 6.2.1.7 Packet Tracer - Configuring VLANs
, it stops, says there is another video, but I can not find 6.2.1.7 Packet Tracer - Configuring trunks?
thx (very helpful video)