filmov
tv
How to Mortise Hinges With a Chisel
Показать описание
Check out our new Windows & Doors Project Guide for more tips on hanging doors:
Although a router and jig can be used for the job, mortising hinges with a chisel is a solid, time-tested method. Watch this video to master it in a minute.
The mortise depth is equal to the thickness of the hinge leaf, so, as a guide, put a piece of tape on the chisel at the thickness of the hinge. Then, cut the perimeter of the mortise by tapping the chisel to depth along the line with the flat back of the chisel facing away from the mortise. If the hinge has rounded corners, use a utility knife, again with the hinge thickness marked on it.
With the perimeter established, make a series of cuts to the marked depth in the field of the mortise. With the chisel’s bevel down, carefully chip away material to make the mortise. It’s best to start in the field and work toward the edges to avoid compressing the edge grain.
To complete the mortise, use a wide chisel with the bevel up in a skew motion to get it nice and flat. Before moving on, test-fit the hinge to make sure the mortise is deep enough so the hinge leaf sits flush. If necessary, shave some more off, but don’t over-cut.
Connect with Fine Homebuilding:
About Fine Homebuilding:
Although a router and jig can be used for the job, mortising hinges with a chisel is a solid, time-tested method. Watch this video to master it in a minute.
The mortise depth is equal to the thickness of the hinge leaf, so, as a guide, put a piece of tape on the chisel at the thickness of the hinge. Then, cut the perimeter of the mortise by tapping the chisel to depth along the line with the flat back of the chisel facing away from the mortise. If the hinge has rounded corners, use a utility knife, again with the hinge thickness marked on it.
With the perimeter established, make a series of cuts to the marked depth in the field of the mortise. With the chisel’s bevel down, carefully chip away material to make the mortise. It’s best to start in the field and work toward the edges to avoid compressing the edge grain.
To complete the mortise, use a wide chisel with the bevel up in a skew motion to get it nice and flat. Before moving on, test-fit the hinge to make sure the mortise is deep enough so the hinge leaf sits flush. If necessary, shave some more off, but don’t over-cut.
Connect with Fine Homebuilding:
About Fine Homebuilding:
0:01:00
How to Mortise Hinges With a Chisel
0:09:11
How To Mortise Hinges By Hand for a Perfect Fit
0:12:06
How To Mortise Hinges (and other hardware) By Hand
0:09:05
How To Mortise Hinges With a Chisel | Chisel Out for a Hinge by Hand
0:05:26
How to cut door hinge like a pro - diy
0:21:54
How To Mortise Door Hinges Using a Router - WOOD magazine
0:17:16
How To Mortise Box Hinges - WOOD magazine
0:14:20
How to install a ROUND HINGE with BASIC HAND TOOLS!!!
0:02:26
How to NOT screw up a hinge mortise with a router.
0:03:26
How to Cut Perfect Door Hinges | Fast and Easy | Ryobi Door Hinge Template
0:01:14
How to Mortise Hinges With a Chisel
0:00:52
How to Transfer Hinge Locations to a Replacement Door
0:08:46
Door Hinge Mortising Jig // How-To // DIY
0:05:36
How To Mortise Door Hinges With A Router Tool-Full Tutorial
0:00:32
How to Mortise Hinges With a Chisel #shorts #hack #tips #mrbeast #motivation#tools #diy
0:12:18
Ryobi Hinge Jig - An Objective Look at the Ryobi Hinge Mortising Jig
0:06:21
WOW - Cut perfect door hinges in minutes
0:13:36
Fitting flush hinges for cabinets [video #314]
0:09:25
DIY Mortising a Hinge Into Door Jamb_Door without a Jig
0:17:19
How to Hang a New Door in an OLD OPENING | Whole House Interior Door Slab Replacement
0:03:09
Milescraft 1222 HingeMate150 Door Hinge Jig - How to Rout Hinge Mortises on Doors and Jambs
0:00:18
How To Quickly Mortise Hinges
0:04:22
How to Cut hinge Mortise on a Door with Ryobi router 18v
0:01:25
Woodworking Tip: Hinge Mortise Fix
Комментарии