2012 2013 2014 Honda CRV Front Bumper Removal How to Remove Replace Install Grille

preview_player
Показать описание
Step by step how to remove the front bumper on a 2012 2013 2014 Honda CRV.

Replacement Front Bumper Components
Рекомендации по теме
Комментарии
Автор

5 years later and this video is still very helpful. Thank you again for making it! Easy to follow instructions that made my project so much easier. :)

ScottyfromCO
Автор

I've had this video filed away for about a year, knowing that I had to replace the housing for the driving light on my wife's CRV (now handed down to our daughter). I finally got around to it this week and the video was absolutely perfect - so perfect I discovered that apparently when the Honda dealer did some warranty work several years ago, they didn't put the lower part of the bumper shroud back together properly (I had one bolt and 5 body pins underneath instead of 2 and 4).

ImNorm
Автор

Perfection. You made it look relatively quick and easy even for us amateurs.

williamdutton
Автор

You sure know the honda crv my friend! Best instructional video I seen!
Keep up the good work! God bless you abundantly!

luiscotto
Автор

One of the best instructional videos. Thanks, you’re the real deal…

lawrencebaranek
Автор

Was going to bring mine to a shop but thanks to this video will tackle on my own!

ayyfro
Автор

amazing you are, did this yesterday replaced both headlights with both your videos on my 2014 CRV. would never known where to start without this video. very kind of you to take your time o explain this so clearly. thanks again.. took about 1.5 hours.

AERIALBOY
Автор

You rock! Thanks for that man. There was a table on the freeway and I had to replace a busted front light. The parts list saved me a lot of grief too. Now I have to figure out if I can salvage the fog light.

jeff_t_matsuda
Автор

Great instructions. Those two hidden grille clips in the top corners are pretty tricky. But at the final stage of pulling off the wrap - I wouldn't just start pulling straight forward, especially on an older car, because the older plastic gets, the more brittle it becomes. After breaking the 3 connection points on each side, I decided to slow down and carefully pry each of the 4 remaining connection points on the front. Just get a small flat head and go along the top of the front, twisting / prying those points loose. Totally worked and I didn't break those remaining plastic "tabs" that clip the top on. I'm not too worried about the broken 3 on the sides because of the screw on each side.

geraldg
Автор

Excellent instructions. Finding those two top corner clips is quite the trick. They are barely visible through the grill slats, with a LOT of light.at an awkward viewing angle. Luckily they are yellow so they are recognizable when looking carefully through a small slot in the plastic surrounding it.
Thank you.

alexanderzubar
Автор

Just replaced the top cover on Honda CRV and it took took me 20 minutes. Your video was great couldn't have done it without it.

rafaelmercado
Автор

Thanks a zillion. Installing a base plate and tow bar, and their instructions just didn't make sense on taking the grill off by unclipping from the backside. Coming in from the front of the grill is SOO much easier. Thanks!

davebeacham
Автор

Just replaced the top grill trim using your video. Amazing video, thanks!

byronmorris
Автор

Best ever instruction “ever.”
Thank you.

larrysurtees
Автор

Thanks!! You were so much help! I appreciate your simple and easy to follow instructions ... just finished installing two new headlamp bodies ... just one trip to the hardware store for a super long Phillip's screwdriver. Thanks again!!

scottjensen
Автор

Perfect, thank you so much, I ordered grill clips first because I knew they weuld be brittle and they were. Got the grill off after very careful work..the top clips being the hardedst. I did break 3, but I bought 30 for about $9 on Amazon. Changed out my daughters headlights and this video helped immensely. Unfortunately her hood cable is now broke so I have to do it again.🤦‍♂

dmnelsondds
Автор

Excellent video. I only had one problem. The bottom screws by the wheel wells were rusted and very difficult. Thanks for posting.

sixtytooze
Автор

Can you do a video showing how you put the bumper back on with the clips?

erd
Автор

Thank you so much good sir. Very helpful appreciate the way you explain 10 points too you 👍

stephenvanzyl
Автор

Hello! I was wondering if you might consider doing a video on how to remove items that get lost below in the door of a power window in a 2013 Honda CRV. I left 2 one inch in diameter suction cups on my window and forgot to remove them before I rolled down the driver side window. Both got lost into the door and now there’s a windy sound when I drive on the freeway. Could you pls help? Thanks so much! What a great channel.

bellesebastian