How to Install the JessEm Mast-R-Fence II on Your Router Table

Infinity Cutting Tools - How to Install the JessEm Mast-R-Fence II on Your Router Table

Upgrading your router table with the JessEm Mast-R-Fence II router table fence (RTF-001) is a sure-fire way to get professional results and increased precision for your woodworking routing needs. Watch as Andrew Gibson provides a quick run-down on how to unpack and install the JessEm router table fence on an Infinity Tools Router Table Top.

Infinity Router Table Top (RTT-002):

Professional Router Table Package (RTP-103):

Router Table Accessory Package (RTAP-115):

Infinity Router Table Packages and Components:

[garybehun]

Thank you so much to the guy from Infinity who made this video. The manual of instructions sucks. One thing he left out is the proper placement of the guide rail that's attached to fence rail screwed onto the four predrilled holes under the table. It should project out about 1" from the rear of the table edge. You'll see too that it can stick out only so far or you can't attach it to the fence rail.

[christianderweduwen]

Même si je n’ai pas compris grand chose car c’est en anglais, votre vidéo est super et les sous-titres en français permettent de compléter votre vidéo. Thank you very much 👍

[dan]

Jessem customer service is the best I have seen.

[chrisberardi]

The manual is so bad, I was on the verge of sending it back. If it wasn't for this video Infinity Tools would have had a delivery! Please, redo the manual, inventory and name the parts, provide clear photos or line art that allows you to orient the fence to the table and various parts. Luckily, this video saved the day.

[CanadianCitizenshipTestKit]

Thank you for this video. I knew assembling a fence couldn't be that complicated, but when I tried to read the instruction manual, well....

The JessEm products I have are wonderful. The gibberish in the instruction manuals, however, is hardly English. Engineers should never, ever be allowed to write instruction manuals! Ever!

[ibidesign]

Thank you. In this one video, you've clarified about 39 questions I had from the less-than-clear Jessem instructions. Now, if you could do the same for the Mitre-Slide that is available as an accessory for their Master-Fence II. I'm sure I've got the mounting for the little sub-fence on the sliding Mitre wrong.

[smemr]

Do you have an install video for the Mast R Fence III? It is different and I have a few questions which would no doubt ne answered by watching and install video. Thank you.

[Armandooooo]

What t-track would be suitable if I wanted to mount this fence on a custom router table that is larger than these typical pre-made table tops?

[conjering]

Would it mount on a Ridgid 4512 with a SawStop RT-C27?

[christopherdekonstrukt]

Thank you. I thought I was missing hardware.

[joseluisruiz]

Lol! I just got one for my Jessem router table andnmine came terribly packaged, the foam was torn on one side and the shroud for the vacuum hose was chipped but still usable. Its gonna get some debris when it gets used with the router anyways but still, if your gonna pay almost $300 USD for this. They need to do a better job with the packaging. I didnt even get half of those screws you have on the table but my model was the 04010 so the manual was very confusing.

[jorgestefano]

Hola soy de Argentina..
Quien es el representante oficial de ustedes para poder adquirir ésta herramienta??..
Desde ya muchas gracias por tu respuesta.. Saludos cordiales..

[hugosalamancarivera]

Hola soy de Chile como puedo comprar máquinas tienen representantes en Chile o puedo comprar por internet