FluidNC on MakerBAse MKS DLC32 V2.1

[donjohnson]

Thank you Anthony for posting these videos on the MKS-DLC32 v2.1 board! I am in the process of upgrading my K40 with this board and for me it has been a real slog. I am thinking of using FluidNC and your detailed videos have been very helpful to my understanding of the work that is required. They have given me a much better grasp of the board and FluidNC software.

[whitneydesignlabs]

Thanks for the video! I am fully supporting FluidNC, the 6 axis Universal CNC board and Bart Dring's work! Great stuff. Let's help get the DIY CNC community behind this concept.

[rahimelhajdk]

I think this is the most helpful video about mks
Thanks bro

[xConundrumx]

Yeah the screen thing is not FluidNC's fault. The MakerBase TFT is not open to customization as they don't provide access to the tools to 'reprogram' the firmware on that screen. I know, I asked a few years back.

[kyon_]

Nice just ordered this board for laser engraver

[DanielRodriguez-cmmh]

I have gone from standard grbl to fluid nc but I notice a change in the management of laser power... for engraving on methacrylate I previously used 200mm/sec 20 power and now I have to use only 5 power because with 20 it perforates the material, It seems to me that power management is not delicate... Can someone tell me how to solve this please.

[LeonardoGPate]

Hey man, thanks a lot for sharing those videos! I am trying to run a core XY pen plotter with 2 TMC2209 and a MKS dlc32 2.1 but I am having some trouble with the servo to lift the pen up and down.

In the examples configurations file I couldn't figure out how to make a propper config.

[doug]

I've discovered that the ESP32 only needs pin 0 to be grounded the first time it is programmed, thereafter it can be programmed without grounding.

[beykana]

Hello, I have the same card. The Z axis is off and I can't move the motor. When I try to update the software to solve the problem, it does not see the card. Any idea how to fix the problem?

[giova]

Hi Could you help me monitoring a cnc using fluidNC?

[Schraubfreak]

Good video thank's for it. It's possible to get the Display to work?

[JeffCanada-fhdt]

Are this board conpatible with ortur laser master 2??

[avexoidavex]

Hi Anthony! Please tell me, what exactly makes FluidNC better for CNC than the default firmware? I want to build a small CNC milling machine for a hobby, and am wondering if I should reinstall the board firmware.

[nature]

Hi
I am Taljit Singh, from India... I am developing CNC router 8*4 feet bed Earlier I opted. Arduino uno & GRBL sheild as controller

But now I go for MKS DLC 32v2...board, I flashes Fluid NC in board as you showed ( follow your instructions) but I had one problem, when I connect my limit switches to board, it disconnect And COM not find the connection.... Can you suggest me the solution.

Thanks

[rics_zip]

Will you still make videos of this topic (fluidnc, esp32, mks dlc32 2.1)?
I'm new with this too, and this video helps me a lot!

[francescofranceschini]

È possibile usarla su cnc 3018 con fresa è non con il laser

[MrRysiek]

Mam problemy plik.yaml otwiera się jako plik tekstowy nie umiem wgrać wykasowane mam wszystko co robić jak zmienić

[peterbardos]

A nice video. Can you tell me which board you used? The MKS DLC32 version 2.0 or 2.1? I can not see it in the video.

[jamescullins]

How hard would it be to use external stepper drives like Geckos?

[arinurcahyo]

Hi, Nice video and well explained. I bought this board recently too with the same version. btw, what advantages of fluidNC over MKS default firmware?