MKS DLC32 WIFI CNC Control Board Review

This is the new MKS DLC32 V2.1 Wifi CNC Control from Makerbase.

this board can be used to control any CNC machine that operates in the XYZ plane using stepper motors.

in this video i have reviewed the board and shown you how you can use the board, how to set it up, install the latest firmware, how to connect the board to wifi through which you can use the board using any device in your wifi network. also you can use the board using the MKS laser smartphone app.
i have set up the board to use with my laser engraver

you can find all the useful links here:

#cnc #laser #laserengraving

[pierpa_pierpaolo]

But here there are two "Y's" and not XYZA . How do I solve on the software? Thank you very much.

[HollywoodFun]

I set this card up with three external stepper drivers for my homemade 3 axis CNC machine. I'm using open builds control to test everything and it seems to be all working correctly. I'm wondering if I need to supply the board with 5 volts if it's not connected to USB? Or does it get all of its power from the 12-volt connector?

[dacianfd]

I can use this board with the draw cnc ?

[skurniyantomappadang]

can this board use for 10 watt optical power for laser diode? thanks

[aqwamnasimbada]

Can we add relay for automatic spindle switch?

[AnzAnnGaming]

Can you share the stl file for the case?

[roberthosking]

What is "S" axis? I noticed mine jumped to 50 today. Weird.

[Сергей-вв]

Можно ли подключить к этой плате старый offline contriller с кнопками?

[africanhubza]

how do you set a zero point to start from

[xandi]

would this work for the 2D Pen Plotter with all the same feature or is it just for laser engravers

[AbdullahKhan-vbxr]

please can you tell me about the wiring of the nema17 with mks dlc 32v2.1. I am facing issue with the running of the motors with the board.

[zaffy]

Hi sir can you please give case stl files. Dlc32 board case.

[ytskt]

How are you buying it in India?! Or is there any Indian supplier?

[MineOrebaker]

I am having a problem like once I connect my msk laser tool for wifi and after that If I disconnect the power then my board is not connecting again I'll have to connect the board and reconnect for software while plugging so there is any to skip this ?

[akhmadabai]

if wifi setting installed are can still use in Lightburn?

[HollywoodFun]

Why doesn't the mobile app have z-axis?

[flopesff]

I am having an issue using this board. During the milling, the Z axis is going down. Do you know what happening?

[Roberta]

my dlc32 v2.1 board does not auto connect to wifi

[omKumbhar]

Where to bay this full kit in chip price😊

[frankhovis]

You realise there is almost NO support for this board and the last firmware update was a year ago?