Delonghi ECAM 22.110 / ECAM 21.117 Test Mode

Delonghi ECAM22.110 / ECAM21.117 Test Mode

[diyiiis]

Excellent! После прогонки теста нашел способ устранения неисправности кофемолки (не запускался двигатель, загорались 2 значка переполнение и авария). В нормальном режиме сделал прогон-подогрев нажатием красной кнопки - неисправность устранилась.

[vicer]

Hello, may you help me? I have a delonghi super automatic 22.110. In the manual it's not clear what level of hard water should I program the machine.
If the water I use for the machine is not hard. I mean is really good and pure water should I program the the coffe machine in level 1 or 4?

It's not clear if the soft water is level 1 or 4
And the hard water is level 1 or 4.

Tanks a lot

[stevenchin]

Hey, do you know how to set the ml. Don't know what happened but I now get 2 shot of espresso for single short function so coffee is watery. Thanks.

[Naughtystimpy]

Is there a way to reset the stats counter on delonghi coffee machines?

[mmi]

can anyone tell me how can i reset if the infuser is locked on top position?
I followed the steps explained for the realignment of the infuser but it seems that it does not work if it is blocked at the top position

[johnnybb]

Thanks for the video. On the statistics mode-- counting the number of coffees. Is this number for single espressos? And assuming it is, when I make a coffee and press the 2 espresso button, does that count as 2 units in the statistics? My 10 year old machine has a huge number and there's not way it's correct unless it's counting a 2 espresso button (bottom left on the machine) as 2 units.

[alipasa]

Bizdede ayni makina var önceden pres olarak çopu veriyordu birtane yayi dustu simdi pres yapmiyo ve servisi yok Yalovada tavsiye edermisiniz serviz

[abcdefg]

Hi, can you add a video on how to open the back cover of this machine?

[uldericodelgiudice]

Fatto la decalcificazione alla macchina caffe de longhi ma non si spegne più la Lucina rossa decalcificazione o rispettato la normale procedure a fine ciclo mi lampeggia che significa devo aspettare che si riscalda

[oeeqzzz]

What can I do if the warning light turns on, but the light is never off, can you help me, please?

[ricolimorico]

Hi,
Thanks a lot for all your vid
I bought my DeLonghi Magnifica XS from Costco MN
120 v - 60 HZ 1250 W
Type ECAM 22110 B
P= 1.5 MPa (15 bar)
When I took it to North Africa and by mistake I plugged it in 220 V
I smelled little burning. I still can turn it on I can hear the coffee grinding all screen look good with green and yellow light but it doesn't dispense water nor a coffee.
Please help.

[yavkatakamenov]

I have a problem, sometimes when I start my machine it crashes. I have ECO and exclamation mark triangle ? When i restart from back button it's same ?? After a long period of time with the machine turned off, does it work everywhere?

[rejuvarhuddlan]

I did this and now I can’t get the machine to switch back on again 😬

[victorbotezatu]

cum se reglează cantitatea de cafea???

[kittysitter]

Thank you! This was very helpful. There is NOTHING like this in the manual. Very strange...

[bradward]

Helllpp! My wires seen to be loose and I cannot turn on my coffee machine as the on /off button isn't responding

[Nich_R]

Hi! May I ask you something ? How can I adjust the grinding time? The dial front button is set on maximum but my coffe machine is grinding for 5 seconds. I have at work the same model and time is 7 seconds of grinding. Because of this, the quality of my coffe is inferior than other one. Thank you in advance.

[brianstockford]

I need some help and hope you can point me in the right direction. As soon as the machine goes to put power to the pump it comes with the three error lights. The two on the outside our blinking and the one in the middle is solid. Thoughts.

[texplorer]

When attempting to remove the infuser is stuck in an incorrect position
1. Close the service door and replace the water tank

2. UnPlug the appliance at the mains and switch off at the back switch

3. Switch the appliance on

4. Switch off, and wait for this process to complete as indicated by the lights going off


The appliance on and allow the infuser to automatically realign correctly.
The infuser is now in its correct position and can now be removed.

[wojciechspurek]

I have a question is it possible to reset the settings to factory defaults?