Tractor Supply Store T-Fence post puller. Review and tutorial.

Review and tutorial of the Tractor Supply Store T-Fence post puller. In the video we will show you how to use the T-Fence post puller, to pull T-posts. Please subscribe for future videos on using this tool to pull round steel posts, and 4"x4" wood posts.

Here is the link for more information.

[stacyjohnson]

Pulled a couple by hand and decided to purchase this tool. Best money spent. Pulled several post with very little effort.

[djkobafemi]

Went to tractor supply this morning to purchase this without knowing how to use it to pull t-post and unfortunately the employee told me that I needed to buy a chain. Your video showed me that's not correct and I'll need nothing else. Thanks for the video

[troyb.]

Nice short video to the point. Well done thumbs up!

[cliftonrobinson]

Got mine yesterday. Worked well, had to do a little angling on some but I got em all out. Whole lot better than digging and wiggling for 30-45min a piece. The base does tend to sink into the ground, but it was $50 well spent. Pulled up 15 posts in close to an hour

[rainbowboa]

i worked on a ranch for several years, we had one very similar, worked like a champ! most of the time we just wiggled and pulled and they came out pretty easy!

[scottblodgett]

Just bought one Yesterday and pulled 50 posts with it. I have no complaints very good product

[Death-Sticks]

Thanks for the video demonstration. I'm buying one today. I should have bought one years ago.

[Horselackey]

We are 70. Finally got one for our farm…have hundreds of tee posts…thought we would get a tool, after rocking them out, using shovels, even our tractor bucket. First attempt on Ga clay…can’t budge it…neither of us. Possibly one of those post we have to dig out with pick and shovel…and yes, we waited till it had rained a while…unless you have normal soil…it isn’t helping us.

[andresnacianceno]

I used this when I replaced all the fencing on the ranch. Advice for all posts keep the device close and keep the post straight. I use a cheater bar when needed be careful of your using a chain it can slip. I removed 4-6 inch round posts and up to 10 inch square posts some buried 4' deep. Don't angel the bar so high you get better leverage about chest height. When pulling big post and older tposts have a second person push the post to keep it straight. When I pulled the deeper round and square posts pull straight up then push the post at and angel so it doesn't slide back down the hole then when you begin pulling again straighten posts. Posts with cement whether wood or pipe remember the whole you made isn't always perfect straight up and down sometimes the cement is fatter st the bottom or the middle. I have never had a posts on the property I couldn't pull just take some common sense and testing what works best with this device.

[grahamkearnon]

Thanks for the instruction, my Amazon tool had no info. 2600' of fence posts!

[mazingworldofmegan]

Great video! This video showed me that it is worth the $80 ish to buy this product instead of trying to make my own from wood and cinder blocks❤

[maryrichards]

Excellent, thank you for sharing. Thumbs up 👍👍👍

[elmasmacho]

Thanks brother! Very helpful, maybe now I can get mine out of our New Mexico mountain caliche 👍

[micahreese]

Mine is square tube and a t-post fits in it to make a perfect cheater bar.
Probably the best 50 bucks I've spent outside of Mexico. LOL

[stanleykeith]

Put it as close as you can to the bottom of the Tee post, it works better.

[tonypiggott]

i would set the puller on a piece of old plywood for support, i see a lot of theses vids where the base sinks into the dirt considerably.

[maxieintexas]

Dangerous. At about 1:35 the post nearly did a 'headshot'.

[aslikv]

The place where I work manufactures this. We sell it for 16.37 cad per piece to our Canadian supplier

[JGG]

Great video, thank you for sharing this. Now do a 4"X4" please?

[bigDbigDbigD]

Will it work on chain link fence posts?