How to replace the Raritan 87 Ice Maker Condensing Fan Motor

How to replace the Raritan 87 Ice Maker Condensing Fan Motor
00:43.88: Begin by laying the unit on its side.
00:48.00: Remove the two fan bracket mounting screws.
00:58.00: Next, stand the unit upright and remove the back panel.
01:08.00: Use care when removing the fan motor bracket assembly not to damage the copper tubing or components.
01:19.44: Next, unplug the two electrical spade connectors on the fan motor.
01:29.10: The fan blade is a frictional fit and can be separated by pulling the two components apart.
01:39.00: Remove the two motor mount screws and fastening hardware.
01:52.50: Install the replacement fan motor onto the bracket, using the existing fasteners.
02:11.90: Install the frictional fit fan blade onto the motor shaft.
02:19.80: Reconnect the electrical spade connectors by pressing gently.
02:19.80: Reposition the fan motor blade assembly into its approximate location.
02:35.00: Place the unit on its side and reattach the mounting screws to the bracket.
02:50.00: Verify the blades have proper clearance and spin freely.
02:54.80: Reinstall the back panel and allow the unit to stand upright 24 hours prior to restarting.

See Our Full Line of the Best Marine Sanitation Products on the Market
Macerator Pumps
Macerator Toilets
Marine Toilets
Electric Toilets
Manual Toilets
Marine Hoses
Marine Water Heaters
Marine Ice Makers
Marine Sanitation Devices
Marine Holding Tanks
Boat Cleaning Products
TruDesign Composite Fittings

Other Marine Products Videos

Raritan Marine Sanitation Products
530 Orange St. Millville, NJ 08332 Phone: [phone]

Contact us on our other Marine Products Social Media Channels: