Ryzen 7700 OC settings

Here are my OC settings for my Ryzen 7 7700.

Full system specs:
MSI PRO B650-P WiFi-

AMD RYZEN 7 7700-

G.Skill Flare X5 Series 32GB (2 x 16GB) 288-Pin SDRAM DDR5 6000 -

GIGABYTE GeForce RTX 3060 Ti Eagle OC 8G-

Phanteks Eclipse P360A-

EVGA 600w BR-

Silicon Power 1TB - NVMe M.2 PCIe Gen3x4-

(These are affiliate links clicking on them really helps the channel out!)

[tnhem]

I've been using -30co and +200mhz completely stable for months now and I get 20k+ on multicore cinebench r23. Thanks for sharing your settings.

[edgelord]

thanks for increasing my cinebench r23 score by abt 2000

[Dhrazor]

I have the same 7700 but with a B650 Tomahawk Wifi, I'm doing +200Mhz -35co all core with a 95W limit(112W really). Went to 95W because the all core was only ~5100-5275Mhz, now it does 5250-5300Mhz ...

[MrAnimeMilitary]

Thank you for this tutorial. I will try out the settings. I got a Gigabyte B650M X AX Gaming motherboard, G-Skill 32GB DDR 5 Ram 6000 MT/s, MSI 850W PSU 80 Plus Gold, and a PNY RTX 4070 Ti. I bought my PC back in November of 2023. I was supposed to get the X version of the CPU but by the time I had the funds ready, the hop ran out of stock and settled with the base 7700 model. I tried to use the motherboard preset of Max 80 degrees C at Level 5 and activated EXPO for my RAM in the Bios. I tried to open Cinebech to test it but my PC would end up rebooting. I went back into the bios and revert everything back to default settings. I will give this one a try.

[sc]

Bruh i found a new kink.

so I did -35 curve opt all cores and PBO negative 200mhz.
Dialing the down the 7700 to 5150 mhz.
Was able to bring CPU Temperature down from 75celcius to 55 celcius under Helldivers 2 Max graphic settings on rx 6700xt with ambient temperature of 29 celcius.
Without hurting a single fps from my gpu at 99% utilization.

If we are using gpu below the level of rtx4070, theres no need to enable pbo +200 mhz. As the matter fact, Underclock your CPU by -200mhz. will give you crazy gains on temperature.

[norge]

7700 here. I had serious overheating issues when running prime95. CPU was literally hitting 95c+ with a PA120. After a few bios updates I went with PBO 80 lvl4. CPU hits 5.4ghz on all cores in some situations.

[vinsan]

I followed the same steps and I got 20064 multicore score in Cinebench R23
And on stock I got 16980.
It's a great difference and the temperature were88/89°C throughout the testing

[Damian-pw]

Ive done everything just like u. Got a quick question. Why dont i see the cpu speed on 5.3 yet its still 3.8 and ddr 6000.

[ALX]

i've tried your settings, that's ok with asrock x870 Rs Pro WiFi. I have 5.5Ghz in game most of the time with -30 CO and 60°C watercooled . Don't forget to enable Ram OC mode to apply expo profile.

[azrafi]

Running fine with this settings at 90w power limit..hits maximum 61°C.. getting 19.3k multi core n 1900 single core ant cinebench r23..single core hits 5550mhz max

[johnnyv]

I have the exact same setup as you and followed the video to the letter. I cannot get the bios to show anything but the stock 3.80. Any suggestions?

[whomadethis]

I use same CPU with a MSI B650 Gaming Plus wifi and Rx 7900 xt for the GPU, 750W 80+ PSU, 2×16 gb 6000mhz cl30 ddr5 RAM. Sorry for bothering you, will it be safe and stable if I set my OC setting same as you. I really 1:00 need low temps with a little bit more performence if its possibble. Thanks for answer❤

[D-qs]

Set vcore 1.2, f10 +enter. This is the only setting you need guys.

[meatscepter]

I did the same and scored 1125 in Cinebench R24!

[big_dad]

Are there any other setting you have changed that may seem obvious to you but maybe aren’t. We have the same exact hardware and I can’t get my bios to show any change in CPU speed. Thanks

[gamingfromjohnwayne]

Wow mine went from 18526 in cinebench to 19235 not bad at 5.116 mhz

[EXTENDCS]

suprisengly this works on my 7700 too. did a stress test on occt and it run perfectly fine though before i updatead my bios i was crashing in cs2 a bit

[ashrafjahan]

In my current build i still didn't added any gpu and my ram is T force ddr 5, 5600mhz should I oc it to 6000 mhz and then apply all the processor oc?
Early Tnx for reading my comment.

[robinrai]

For me 30mv is unstable, at -25mv and +0MHz, +100MHz, +200Mhz I get the same 19800-20150 in cinebench, and the same 5280-5311Mhz on all cores. 85 degrees max for all settings. At PBO level 2 or -20mv I get 19500-20000 and 5260-5280Mhz so it seems it’s basically based on how low you can undervolt

[enriquescarano]

Is it normal to experience fps inconsistency in games with PBO enabled? At the moment i'm using cpu ratio at 4800 and cpu core voltage at 1.2 but i'm scared that i'm leaving some performance on the table (with pbo disabled)