Nissan 3.5 Firing Order - Piston order

preview_player
Показать описание
This particular Nissan Murano is a 2006 but the firing order or plug order on other models V6 3.5 Nissan cars Maxima, Quest, frontier, xterra and its the same

Hope it help some one out there. Dont forget to SUB!!!

Follow me on INSTAGRAM

Twitter.

Facebooks Hobbies

My Gaming Channel.

DISCLAIMER:
Try this procedure at your own risk, and by no means I'm I responsible for possible Stripped heads, Broken bolts,broken hoses or gaskets, because of improper installation or broken parts etc, proceed at own risk.
Рекомендации по теме
Комментарии
Автор

Papapa I appreciate everything you have shown me.100% papapa. I searched other videos for the right order of the coil packs and didn't find them. Thank you and God bless you 🙏.

AntonioRosales-lvbi
Автор

Thanks for taking the time to show the location this helped fix the cylinder 4 misfire and the car is running much better now no more rough idle 💪🏽

TheBajanMan
Автор

I got the 0304 code on my Maxima and I was ready to remove the intake manifold but now I know there's no need! I was unsure of where was the cylinder 4, thanks to you, I'll save a lot of time since it is on the front.

LOVXRLRL
Автор

Hello Falcon's Garage my Nissan was misfiring I went to the mechanic and the car was good for one day now again the car is misfiring on the same piston and they switch the new coil from number 2 piston to the 4 piston I don't know myself I fix scooters but not car so I order a set and I think I will change the all set of coils and sparkplugs . Thank you for making this video

VirberelloScooterTips
Автор

I have a 2006 nissan altima 3.5..its says i have a cylinder 4 misfire..I cannot locate it...Do you know where its at?

jakirmalik
Автор

What is the firing order 2005nisan altama 4cyclliider

DemetriusWilliams-vbzh
Автор

Gotta tell ya dude. Your Vids rock!!! I'm currently replacing my #1 3 5 plugs (by the firewall) I have a misfire on the #1. Should I change out the coil for that cylinder also? How do I check to see if the coil for # 1 is ok? Also I forgot how to access the vid on the removal of the plenum. I watched it a few days ago and was wondering if you could send me the video/site that's its on. Thank you in advance sir.
Just a note here, I had an engine analyzer check out my misfire prob. But only that #1 Cyl. was a misfire...my guy suggested to change out all the plugs, which I will do while everything is apart.

tedhernandez
Автор

I’m getting PO304. Should I do a coil pack and spark plug replacement on number 4?

salet
Автор

I have a question maybe you can help me I replaced the spark plugs of my Nissan quest 2004 but now after the replacement is misfiring cylinders number 5 you can help me ?

lucasjuan
Автор

Yo man can you help me out with identifing all 4 O2 sensors? I need bank 1, sensor 1. and bank 1, sensor 2.bank 2, sensor 2

ChiTownGuerrilla
Автор

Where’s the vid of you removing the intake manifold?

mfnrjay
Автор

One question, why was your cylinder 5 misfiring?

swervenight