How to pair IKEA Styrbar

How to pair IKEA Styrbar?
To pair an IKEA Styrbar, follow these simple steps

#ikea #ikea_styrbar #styrbar

Make sure the light source is installed and the main power switch is turned on.
Hold the remote control close to the light source you want to pair (no more than 5 cm away).
Press and hold the pairing button on the remote for at least 10 seconds.
A red light will shine steadily on the remote control.
The light source will dim and flash once to indicate successful pairing.
Repeat steps 2-3 to pair up to 10 light sources with one remote control.
Make sure to pair them one at a time.
If the light sources are close together, disconnect those already paired from the power.
Important
Press the pairing button quickly, not slowly as stated in the manual
For the light bulb, quickly toggle the power switch 6 times until it flashes
You may need to try pairing a few times for the remote to be detected.
Once paired, you can control the brightness of the lights using the remote's buttons. The STYRBAR remote is compatible with IKEA's TRÅDFRI smart lighting system.

Related Queries:
How to pair an IKEA smart bulb?
How do I pair my IKEA Home Assistant button?
How to add IKEA styrbar to Home Assistant?
How to sync an IKEA remote?
Issue pairing connecting IKEA Styrbar remote to deConz
IKEA STYRBAR Remote Control
How to Install TRÅDFRI starter kit with STYRBAR remote control
How to connect IKEA TRÅDFRI smart controls
How to Connect Ikea Styrbar Remote to Your Light
How to hard reset IKEA STYRBAR Remote Control
how to fix ikea styrbar not pairing

[gaelicd]

Hi
I've several lights operating from this remote. The remote works fine in controlling these. Why is it I can't see the individual lights or remote installed in the phone app