Setup Yamaha MG10XU Audio Mixer For Zoom

In this video we show you exactly how to connect and setup the Yamaha MG10XU Audio Mixer for Video Conferencing with Zoom!

PRICING FOR EQUIPMENT FEATURED IN THIS VIDEO:

These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.

ADDITIONAL VIDEOS FOR MORE INFORMATION:

CHAPTERS:
0:00 - Introduction
0:45 - Pricing & Specs & Equipment
1:10 - Mixer Prep
1:39 - Connect Headphones & Microphone
2:00 - Microphone Settings
3:12 - Zoom Setup
3:50 - Monitor/Headphones Setup
4:40 - Zoom Settings
6:42 - Final Thoughts

BECOME A MEMBER OF OUR CHANNEL FOR PERKS & EXCLUSIVES:

STUDIO EQUIPMENT:

SOFTWARE & TOOLS:

Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.

All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.

Copyright: 2024 Kettner Creative Inc., All Rights Reserved.

[codependentmillennial]

This is really helpful. I have never used a mixer before so I definitely have to learn some more basics before I fully understand everything you’re doing in this video, but I know that I’ll still be able to set everything up with this video even before I learn more about how all of this works. Thank you!!!!

[kamalranatunga]

The best audio Engineer I've ever had in cyberspace .. thanks a lot that a person like me without much tech knowledge manage to set up MG10XU unit for zoom. Now I have an issue connecting Boya M1 Lav mic, tried with different connectors and just give notice without audio coming out. Much appreciate your advice or perhaps another video, since this setup is very common with online teaching. Thanks

[noelcidro]

Big thank you for this. Having output now back to my monitor headphone. Thank you so much! God bless you all.

[disciple]

Hey KC, first I want to say your channel provides tremendous value to the community. You all really stand in the gap where many A/V channels are falling short. You deliver excellent quality and explanation with no strings attached.

Second, I have a question. I am a “newb.” I purchased a Yamaha mg6 (non fix) to use in my home studio. I record content for my YouTube channel and want to get into interviewing and live-streaming. I have Streamyard. So my question is this: since I didn’t understand “mix minus” and the importance of having an “aux” on a mixer before purchasing the MG6, what is the best way for me to interview through Streamyard using my MacBook, MG6 and my Shure dynamic mic?

Any advice you can give would be greatly appreciated. Any other routes besides buying the MG10?

[RoamingAroundUSA]

This is a great mixer, no doubts! I just recently bought one, and I am super-duper happy with it!

[rdGemini]

@4:33 Thank you! I was setting this mixer up with voicemeeter and was getting a feedback loop into discord from this mixer and it was all because of the "Mon/To ST" button being pressed down.

[arthurpogue]

How do you get that clear sound with the base sound in your voice a very professional sound

[marcobenitez]

I appreciate your tutorials. You’re very good at breaking things down. I just got my Yamaha mg10xu yesterday. I intend to connect it to my MacBook Pro and use it to record the audio for a zoom meeting. I plan to use the two XLR outputs to send the mix to my Tascam recorder. Here are my questions:
1. Will using the setup you outlined in this video send a mix minus back to zoom? That way my guest will only hear my voice on her end?

2. I want to record the zoom usb input from line 9/10 panned to the right and record my mic input on line 1 panned to the left. My goal is to then have two separate tracks for my mic’s audio and my guest’s that way I can’t improve my guest’s sound later since they will be speaking into their computer’s mic. Do you think what the setup I just described will work as I intend it to?

Thanks so much for your time and hope you can reply.

[One-Eyed-Willly]

Thanks for explaining the "" to mon/to st" button. I was wounding what that button was for and I was lucky that I use Zoom and other software in half duplex so it didn't loop back.

[rajdesai]

Hello KC, very informative tutorial. I just have one question to set up Zoom meeting; how to set it up the connection so that the participants and the presenter’s voice come thru pa speaker and not the headphones? Thank you

[ThomasWilliamsIII]

Thanks for the informative video. We have a large ball room with built in speakers and XLR connections for mics and mixers on a wall plate. I want to take advantage of the audio equipment in the room. I'm new at this but I'm trying to connect a ZED10 mixer to a laptop via USB and selecting the mixer codec to route speakers and Shure microphones for a Zoom meeting. Is there a video I can watch that explains how to make the wired connections. Again, thank you

[itinkle]

Thanks for:
not doing the like and subscribe at the beginning of the video
explaining clearly and concisely
having great quality video and sound.

I don't know about subscribing, but its a like for now for sure.

[robertpendilla]

Thanks for your tutorials! Very helpful. I teach group fitness classes on zoom and want to get rid of any delays. Is there a way to ensure that there is no audio delays with my mic and music? Also is there a way to hear my voice on a monitor (Kustom Pa)? Right now all I have is my music going through my Monitor as playback and no voice.

[Joe-cirn]

Great content. Thank you. Is there a way to connect the mixer to a PC over a wired or wireless network connection?

[kaffepojke]

This video seems to be exactly what I am looking for, but for the wrong mixer! I am having similar problems trying to set up a fully hybrid Zoom meeting using a Behringer 1204 USB. I have never had a 100% accurate sound setup, although all components of the mix have worked at one point or another. I am a complete novice to mixing and mixers, so I am somewhat overwhelmed. Do you happen to have a "settings" video for bother Windows and 1204 USB? I am using 2 laptops for the setup, 1 each of Windows 10 / 11. Thank you.

[Alan]

Love your clear and practical explanations Jordan. I would like to know the best way to connect the Yamaha MG10XUI to run a hybrid event. Several Rode wireless mic inputs, the signal then needs to go out both to speakers in the room and to people on Zoom. Also when people on Zoom ask questions I need for that to go to the room speakers for the people in the room to hear the Zoom people. Is it best to use the USB connection for input from computer, or output or best to avoid using USB for this scenario. Any help here would be greatly appreciated.

[aaronwhitelaw]

How do you do that and setup, along with having a live pep rally? Speakers connected TO the mixer in the gym while streaming on zoom??

[stevetx]

I would like to be able to also output the zoom audio to speakers in the same room. Can I do that without getting feedback? If so, how do I avoid feedback? We plan to feed several microphones into the mixer from other speakers and there will also be an live audience as well as Zoom attendees.

[IsraelHPerez]

Is this possible using just a celphone instead a laptop??? Thank You very much.

[Mickeyj]

I really appreciate you tutorials. This one helped me set up zoom for a client using the same mixer. I was using my IRig but this way is better...Thanks 👍🏾.