Concrete guys worse NIGHTMARE we ran short....

In this video we ran short on our concrete patio pour! This is probably the last thing any concreter wants to experience but it happens once in awhile when you mess up your math! Hope you guys all enjoy don't forget to LIKE,SHARE,SUBSCRIBE and COMMENT!

[chichitex]

That was so nice that y’all got the kids in to leave handprints in the concrete! That stuff means a lot to a family way into the future! The work is, as always, perfection. Your crew always does excellent work!❤❤❤

[JonnyDIY]

Great job team 💕👏👍 bummer about the short load, but hey it all comes out in the wash! 🤙

[michaeld]

Thanks for sharing the cost of the concrete in the video, I never knew the short loads could really screw up a job for pricing.

[Underpar]

I've been a contractor for about 20 years I do some pretty crazy woodworking stuff but I've never ever been a very good concrete finisher or drywall mudder. I'm going to watch everyone of your freaking videos and see if I can by myself poor a 12x12 slab and trowel finish it. I don't care if I have to tear it out and do it again I'm going to do it until it's nice.

[ourlifeinwyoming]

Wow - those fees are crazy. Turned out great - looks fantastic!

[isaacalvarado]

Hey. Finisher here. I saw when you rodded out with the 3ft 2x4, you did it right in front of the drain when there supposed to be a valley. When i rod out of that drain, i keep one side to the 2x4 in front of the drain and rod at a keeping the screed at 45 degree angle.

[brianvoll]

The drain not centered on the intersection of the joints in the main slab would irritate me every time I looked at it. Finish looks nice though.

[bartramdilks]

Those were some expensive hand prints! Nice job btw.

[AllAccessConstruction]

Mannn I was a wheelbarrow short before..littlery one wheelbarrow.. Good Job

[calzam]

Will we see the completed project when the patio is installed?

[purrple.shadows]

Why not have your own concrete mixer for when you need such small amounts?

[finders-keepers]

I've been shorted concrete on driveway pour at my house. I formed it and provided the crete. I'll never use them again

[californiacritic]

It's always a good video when 50 shows up.

[christianalvarez]

Ive said it before, you guys have to start using aluminium straight edges. They are not that expensive and will last a long time. Plus they are 100% straight.

[Harry_Gurvich]

Any chance we'll see the finished project when the owner completes the rest?

[Djm]

Wow looks great bro as always have a good weekend g btw g what's the longest wait time you've experienced when you ran out of concrete and had to order more curious is all

[jonnyhiljanen]

Hello Again Odell, great finish on the concrete. Looks good as always. Are those saw cuts deep enough? I would like you to measure the armouring in the cuts, just put a measuring rod down the cut to see that the armour is at the right distance from the top of the concrete. That would show that the armouring is set correctly and would validify the strength on the slab, and that the concrete will have the strength as it is supposed to have. Sometimes i've seen that you cut the concrete in the lines after it dried, do you always go back to a finished slab and do that? Or has the customer order that to be done?
/Best regards Jonny H

[seephor]

That concrete is way too wet. I would have sent it back.

[hectormorales]

Here in Los Angeles they charge you roughly $160 a yard and $30-$50 every yard you didn’t get for a full 10 lol.

[NickManCuso]

So how does that effect the pour or does it ?