Great jig!!! Cheap Auto Line drill guide - Review

#plywoodworking #guide #drillguide
Please Subscribe and share this channel!!
join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN

00:00 - Intro
00:28 - Auto line
02:55 - drill Round stick
03:20 - centering stock
06:20 - fence system
08:07 - mark alignment
09:40 - horizontal guide
10:05 - large drill bit

Adjustable Woodworking Drill Locator Auto Line Drill Guide Puncher Mini Bench Drill Press Right Position Drill Hole Tool, his locator can be used for a long time and allows for easier drilling of vertical boards.
Featuring a compact size, portable and easy to use, and can be used as a perfect gift for your dad and friends.
Made of high quality aluminum alloy material, anti-rust, practical and sturdy.
This locator is 8 cm long, 8 cm wide and 25 cm high.

link for buy
---------------------------------------------------------
Music Track:
Acoustic Inspiring Soft by RomanSenykMusic.
Acoustic/Folk Instrumental by Hyde - Free Instrumentals
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
🔻
"Keys of Moon - White Petals" is under a Creative Commons (cc-by) license
🔺

[Jrichardstein]

Thanks for confirming doesn’t drill straight. Hilarious, voice over and point to a hole that was off by 1/8th of an inch through a 3/4 board. 😂

[YouZbychu]

Thanks for confirming that this doesn't drill straight.

[MCsCreations]

Excellent jig, dude! Fantastic review! 😃
Stay safe there with your family! 🖖😊

[toddharshbarger]

Nice review - i just got mine a week ago. Its just as you showed although one of the extension bar holes was not tapped completely thru.

[ralphd]

I have one of these & it's junk, the chuck is difficult to tighten properly and now the chuck bearing has seized.

[rustygear]

@ 5:30 you can use those white lines on the sides of the hole to align your bit's center, just get them aligned with the lines your drawn.

[Steve-drrr]

Will this take and hold a 20mm drill bit for wood cheers

[peterhopkinson]

It did not drill a vertical hole, even in such a narrow piece of srock. Look again at the exit hole - the centre was well off the target.

[jeffkeisling]

Thoughts on NEW woodpecker Drill guide vs Rockler. Similar price.??

[mr.b.]

As good as it might be it’s from the PRC, so I’ll buy one that is US or European made.

[vyaire]

Mas boleh dishare pemakai setelah 1 bulan? Apa banyak dipakai atau tdk terpakai hanya jadi koleksi saja? Terimakasih 🙏

[kyamukoyasu]

Nice! What is diameter of extension rod?
the length is 300mm?

[carlosdasilva]

Desculpa não falo inglês, mas gostaria de saber a onde compro essa ferramenta, boa noite👍🤩👏🇧🇷

[acousticsoundmaker]

What is the black colored tool you are using at 3 minutes 38 seconds called and where is it available I would like to purchase one. Thanks for your help.

[miklosfucsko]

Hi! Could you write please, the maximum drill bit diameter? 50 mm or more? Thank you!! :)

[michazaremba]

At 6:00 I can clearly see not-that-perfect-straight result. It's not even good-enough-straight. For such a thin piece the drill was quite off...

[zsoltdr.zsombori]

I am sorry to say that but the drills are not punctual, they are off the center. It is not obvious from the video that these errors are made by you or by the equipment.

[michaelchung]

Hi, can I know where you got it?
Thanks.

[carterscustomrods]

I don't like that this, and nearly every portable drilling system, in a ⅜" chuck. A ½" chuck would be sooo much better. At least let us put a ½" chuck on it ourselves.

[andywodwod]

a very poor quality product, it has clearances that prevent precise work, money wasted,
the host of the show does not discuss and does not show the shortcomings of the device, but only shows that the drill is spinning, such a channel should not be subscribed because it is unreliable, the only thing that can be said about the device is that it is red