Best Ebike Conversion Kit of 2022 | BAFANG Ebike Conversion Kit

So this Hardtail is Powered once again
with a Bafang BBS02B 48V 750W Mid Drive Motor
And For me, I think this is the best and easy way to convert
a Bicycle to an E-bike!
it's cheaper and easy to install
on almost all types of bicycles.

Check it out on the link below and take advantage of my Coupon code
while it is still available!

Aliexpress Black Friday is now live from November 22-December 11! Get up to 90% off on all categories. Using my code 【40DEAL】you can enjoy your discount right now!

#AEBlackFive #AEWhypaymore #AllAboardTheAliExpress

Subscribe TO MY CHANNEL

Follow me on STRAVA

FOLLOW ME ON FACEBOOK

FOLLOW ME ON INSTAGRAM
INSTAGRAM.COM/MARKCHANCE

#AEBlackFive #AEWhypaymore #AllAboardTheAliExpress

[ravenrock]

How about a follow up? Maybe a breakdown on the installation itself? What you need to know, What to avoid, etc

[amirulharith]

Respect for the cameraman for running 25mph🔥

[christopheraaron]

0:56 Those are some fancy kickstands you've got there.

[RitchieCaron]

I did a whole season with the BBS02 in Northern Ontario. It can handle rain sleet and snow like nothing.
The programming cables helps a lot.
I unlocked 9 levels and slow each of them down so my legs don't spin too fast.
You get that when the speed is about 10% less than power level.

[jstar]

I put one of these kits on a 2003 Gary Fischer with disc brakes, upgraded to larger rotors on the front. I'm 61 and in pretty good shape but man this thing allows me to go to places I really couldn't or wouldn't go on a regular bike plus I still get a decent workout (nothing like I would on a regular one for sure) but again, I can go places and for way longer then I would otherwise. Its pretty freaking cool. Sometimes I just like to be out exploring and not so much wanting a killer workout and where I live it gets so hot and humid that a regular bike would just be awful during the hot months.

[ddrowdy]

I have had the BBSHD at 48 volts on a fat bike for 3 years, love it.

[GB-vntf]

Top tip, for mounting the battery use 'rivnuts' as only two bolts to hold the battery isn't enough. I've been running this exact set up for around 7 months with no problems since using extra bolts to hold my battery, which is a 52v version.
Also the gear change sensor is a must. It'll save your chain and all other drive components. I've also put on a 203 front rotor which is very wise as my bike does 59kph on the flat, standard 160 rotors struggle, I've also a 160 fully floating rotor on the rear.
Whys your battery upside down? If you have it on the right way up water won't go into it.

[IraQNid]

It certainly looks a lot easier to install it than early generation conversion kits with their strap on bags, wires all over the place, warnings not to get the kit wet or rained on. The placement of the mid drive motor & electronics makes this ideal for normal or reverse trikes, recumbent, maybe even some quads or multiple passenger bikes.

[ashpunting]

I've got the same mid-drive motor it peaks at 1200w which is 112 Nm of torque and if you get the eggridder V2 display you can Configure the settings from your phone because its Bluetooth I love it I've got full throttle all the time plus I don't need to set up in my laptop all the time it's Instant I could change them when I'm out if I wanted to but now I'm setup I just leave it alone 👍🏾😊

[rimshot]

I've been using a 36V 500W conversion kit from BAFANG (looks identical to the one in the video) since Sep 2018 as my preferred daily commuter, they are excellent!!! I used a little frame bag to hide all the spare cabling & connectors so everything looks nice & neat! STRONGLY RECOMMEND!!

[IdahoEagle]

So far, this is the best kit I’ve seen so far. Thank you for this video.

[MikeKleinsteuber]

I've now done three of these and they are easy to install (as long as you get the right bike with the correct crank size) and they are bomb proof and brilliant to use

[mikeg]

I’m obsessed with the idea of converting my bike. This kit seems to be pretty well reviewed and simple to install

[KermitOfWar]

I put a similar mid-drive kit on a 29er Kent Trouvaille. The bike was $350, the kit was about $800. Sold it to a friend for $1, 650 & I have regretted ever since, since I don't have the time or patience anymore to build another one. It was my Covid project, if you will. It used to go 25 to 36mph going downhill with slick touring tires. 🤣

[nomadchad]

I put one on a used 2009 cannondale downhill bike a few years ago with a 38 tooth front sprocket and its awesome. I have a battery in a backpack and the xt90 plugs under the seat. I used the EGO 56V 5AH battery from home depot. Get an eggrider computer and you can use your phone to change everything.

[ianmangham]

These bafang mid drives are absolutely awesome kits

[NoodlesTBograt]

You can also get a USB cable to connect your bike to a PC or laptop which means you can program the drive to be more or less responsive

[drbichat]

I am 40 pounds overweight and out of shape. Took my old Mongoose conversion to the trail over the weekend. Had a 2 hours blast. Mostly Assist Level 1 for climbing. I realize I need better brakes

[NTuneLabs]

I knew I recognized those SE Coastal GA palmettos! We lived in the Glynn County area for about 7 years too! Great video and a great conversion.

[RCast-ekvr]

If your bike gets wet, hit it with the leaf blower when you get home to blow off all the water. It does a great job.