filmov
tv
BLDC Controller with L6234 and STM32 F303. Simple FOC with 12bit magnetic encoder as feedback.
Показать описание
Now motor is controlled with FOC method. Thanks to the position feedback from encoder, magnetic vector from windings is always 90 deg ahead of magnetic vector from permanent magnets.
0:00:26
BLDC Controller with L6234 and STM32F303. Constant speed mode.
0:00:22
BLDC Controller with L6234 and STM32F303. First test of motor on slow rev.
0:00:40
L6234 Driver + Arduino + Motor BLDC
0:03:06
Brushless motor control with PIC16F887 and L6234 driver
0:00:12
L6234 + PiZero and gimbal brushless motor
0:00:23
BLDC Controller with L6234 and STM32303. Auto-calibration procedure.
0:00:12
BLDC Controller with L6234. Output signals + EN line.
0:00:13
BLDC Controller with L6234 and STM32F303. Constant position mode.
0:00:42
BLDC Controller with L6234 and STM32303. Motor current limiter.
0:00:23
L6234 Driver Motor BLDC - Hard Disk
0:00:10
BLDC gimbal motor open loop control using L6234 board
0:03:14
Sensorless brushless motor control with Arduino and L6234 driver
0:01:00
brushless motor position control made with Arduino, L6234, rotary encoder and MPU6050
0:00:24
BLDC Controller with L6234 and STM32 F303. Simple FOC with 12bit magnetic encoder as feedback.
0:00:53
Brushless Motor mit L6234 und lagereglung
0:09:52
Make your own ESC || BLDC Motor Driver (Part 1)
0:01:17
Driving gimbal BLDC at very slow speeds (Arduino + L6234)
0:09:17
Free Sample Gimbal Drive a brushless DC motor L6234, L6235, L6207, L298, STA516, Diode schottky
0:00:32
COGIP - Custom brushless ST L6235 controller
0:00:56
SimpleFOC + Cheap BLDC Driver (with Arduino nano)
0:02:05
Electronics: BLDC speed/torque control with L6229 or L6235
0:09:47
Make your own ESC || BLDC Motor Driver (Part 2)
0:00:29
Sinusoidal FOC Control of Brushless Motor - Open Loop
0:00:57
3-Phase BLDC Motor Control
Комментарии