Xiaomi m365 2WD Easy AWD mod with stock controllers

Had a Blast with this project, Below are some links to various resources I used.
Xiaogen CFW creator used for my firmware, This enables the disabling of BMS data input for secondary controller to avoid controller errors.

Next Video should be Front and Rear Suspension !! Also In The Works Disk Brake Conversion !!

[Marino_Gomez]

Congratulations, great work, hope this can help me with my 2WD project and will enjoy riding like you 👏🏼👏🏼.. And wishing to watch the rubber rods crushing in the front suspension ;-)

[PHNIX]

Rear motor is china 350W or pro 300W?
usually the highest temperature on the red rim of the disc, i have 945W it so hot :)

[calebbraun]

You should have a break down video or links to how you did all this.

[Full_Throttle_no_Brakes]

You are a genius man. Keep going. I look forward for more videos and tutorials!

[KaktitsMartins]

Can you please export or show a good picture of the power graph? I would like to look at acceleration times and power usage. In the video without speedometer its hard to know what exactly is happening

[davek]

Do you have brakes? I don't see any

[rafganX]

So I did all the wiring but when I power on both dashboards & controllers I only get throttle on 1 motor (main dashboard). I rotated the frozen motor with my hand and tried the brake and it works fine, I just dont get any throttle on the controller that has the secondary dashboard. Any idea?

[BogdanBlagaBacau]

Hi. Very interesting. Can you help me make the connections to the wires?

[landscapes]

Hi, I need some help.
You with the key turn on and off the scooter, I also inserted a key ignition, connecting on the +5 volt positive of the primary dash the key interruption and the negative of the key on the negative of the primary dash to read the + 5volt on the display ( Having two motors I did not know how to connect them on the 2 controllers to view the actual volts of the 48 volt battery).
The problem is that because the two dashs are connected together with the yellow wire, even with the key off if I press the button on the primary dash turn on the secondary dash placed in the tube. How could I solve the problem ? thanks

[ADHD_RC]

Ok this is nice man I like how you have modded king of the xiaomi pro scooter 💪 I see you have a key ignition can you help in any way I have the immobiliser alarm pad comes with 3 wires red black and orange would you have any idea where I would connect these for it to work would appreciate any help great rig 👍💪

[marekplay]

Ok, I like that, really nice concept, waiting for more videos when you riding that thing and do you plan to make a video for with the suspension being fitted? I have built two scooters from scratch myself so I know how you feel, currently riding the MX-60 from Mercane but the DIY scooter is in use special in summer time on the trips around lakes or canal or park.

[lukasgottschlich]

Which bms do you use and how are the bms inputs connected to the controllers? Unfortunately, I don't quite understand that. I would be very happy if you make an exact video where you show all connections

[air]

you didn't have to modify ESCs? I see people switching FETs on ESC to make it support higher voltages.

[dawoodkhan]

Can you use 350w Pro motor on 250w Xiaomi M365?

[UKMrMedical]

Please help me link do this with a ninebot I got it all set up I just can’t work out the wiring I had it working now it’s not please help

[sharifahzaini]

great video bro. Could you please promote wearing a helme in future ? My daughter might be looking at this video and I want her to prioritize safety all the time when riding. thank you very much

[MonkeyUK.]

Your back wheel is disintegrating as you wear going lol wow

[Daescooter]

Great build I want to build mine like that what exactly do I need pls I’m super interested great video👍💪💯

[Hiretto]

Hi! Nice project!
When it will be released the next video with the rear and front suspension?

[catalin]

Hello, I want to know how you wired de 12v fans or on what components if you remember