Cisco Tech Talk: Inter-VLAN Routing on Cisco Business 350 Switches

In this edition of Cisco Tech Talk, I’ll show you how to configure inter-VLAN routing on Cisco Business switches.

[mahuubao]

Networkdesign would be nice ...First yout must activate Advanced Mode from Basic Mode ... In General SMB350 is a Layer 2 Switch ... Only when You activate in the Menu: VLAN Management > VLAN Settings > Edit Interface Settings >Switchport Mode Layer 3 you have a Layer 3 Switch over the Ports

[frankschiavone]

I keep seeing that you need a Layer 3 switch in order to do InterVLAN routing. However the CBS350 line is being sold as a "Layer 2 switch". 99% of the features of the SG3xx switches which were considered Layer 3, exist in the CBD350 line. So what feature or change was made to the CBS line that makes it a Layer 2 switch vs the Layer 3 SG3xx series? Some clarification from Cisco would be nice since I can find anything in the documentation. Either that or overlooked it.

[mahuubao]

You can activate L3 with cli:
int gi1
no switchport
or int ran gi 1-8
no switchport

[igorsimonovic]

and how to connect this to router to get internet?

[wopstarteam]

Leider funktioniert selbst das nicht! Ich habe es nach 4 Monaten aufgegeben irgend einen PC ins Internet zu bringen. Statische Route zu fritzbox funktioniert, aber inter vlan Routing nicht. Unnötig rausgeworfenes Geld und Zeit. Ich habe das Teil weggeworfen.