How To Replace Headlights 2007-2014 GMC Sierra 3500HD

Buy Now!

Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2014 GMC Sierra 3500HD.

This repair was done on a 2007 GMC Sierra 3500 HD and the process should be similar on the following vehicles:
2007 GMC Sierra 3500 HD
2008 GMC Sierra 3500 HD
2009 GMC Sierra 3500 HD
2010 GMC Sierra 3500 HD
2011 GMC Sierra 3500 HD
2012 GMC Sierra 3500 HD
2013 GMC Sierra 3500 HD
2014 GMC Sierra 3500 HD

Tools you will need:
• Socket Driver

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[rock]

Well done. Good video work, including lighting, close ups and avoiding obstructions. Concise, explicit, plain narrative corresponds exactly to what’s in view. There are several other tutorials on this subject, however, I found this one to the best on all points for the viewer to actually be able to follow and DIY.

[mason]

This is the best and most common sense way of getting at these bulbs. I've seen some other videos and they are a pain to follow.
Thank you!

[GurpreetSingh-rlfv]

Very good instructional video…helped me upgrade my 2013 Sierra lights.

[tysdrift]

Nice I knew there was a faster way thanks a lot👍

[rmimiqx]

No need to pull all of the push pins. Remove 2 on the end and place something ubder it to hokd it up. Plenty of room to work.

[jeffpuckett]

Thanks for the how to video, great at that.

[aprillewis]

After changing to new assembly, why would my lights not switch from brights to dim? It's not 11 or 16 fuse. Relay?

[manuelayala]

Grate buddy, thanks for.sharing the video.
That help a lot.

[Kevin-fqhf]

Interesting that the bulbs all need to be changed on a new light? would never figure that

[briancayko]

does this adjust low & high beams both?

[michaellacy]

Key word in this video to remember - “ slide “