LED Flashlight Disassembly including the Pill & Tailcap Switch | Atomic Beam/Outlight/GearLight

LED Flashlight Disassembly including the Pill & Tailcap Switch | Atomic Beam/Outlight/GearLight
This video shows how to disassemble this Tac Flashlight, This flashlight is sold under many names like Gearlight/ E17 Taclight / OUTLIGHT A1000 / "Lumitact G700", "Bell & Howell" / Ultrafire, Alonefire, Shadowhawk X800, , "Atomic Beam", Lightstrike LS360, Skywolfeye, Cree XML T6 & Q5 , and also these flashlights can be disassembled almost in the same way: Sipik SK68, & SK98 - 501b , 502b ,P60

[MRanger]

I could swear that I was missing parts until I saw your video and realized I was inserting the switch backwards. Thanks so much...now it works great again!

[basshunter]

Thank you. I couldn't figure out the on off switch assembly. This is my favorite flashlight around the house.

[dannyg]

Thank you, my light fell apart at the on/off button and the pieces dropped to the ground when I unscrewed the back. I found the pieces but could not be sure it was complete without a guide and to reassemble, even more mysterious. Your video helped a lot. I had all the parts and it was only a matter of assembling. With your video, very easy. Thanks again, DP.

[malaureensanchez]

Thank You. This had been so helpful. I was about to throw away the flashlight when I remembered consulting youtube. Now my flashligth is working again.

[davidmiller]

Thank you. I love this flashlight, and have been trying to repair it, when I ran into your descriptive video. All fixed and functional.

[rubyrose]

Thank you for making this video. It helped a lot. The switch suddenly sunk in and when I unscrewed the flashlight to fix it, everything jumped out and I spent an hour trying to put it back lol. now it’s fixed! ☺️

[GeminiS...]

Thank you brother, you showed me the one thing I was missing in the on/off switch assembly. I was not securing the little black clicker properly.

[TheeDAlfaro]

You're the only one that I saw quickly with a switch assembly! Thank you! 🙏

[MrCancerman]

Thank you so much!!! Your video showed me how to put the damn thing back together - and it's finally working! Thank you.

[judgeroybean]

Very helpful video, very clear. The only problem for me was that the part where the bulb is situated IS SEALED and cannot be either opened or completely unscrewed to separate it from the tube where the battery goes. The torch has DELIBERATELY been designed this way in order that you CANNOT JUST REPLACE THE BULB costing about 2€ but are FORCED to buy a NEW TORCH.

[akashpandit]

Thanks sir
My torch had been shut down for months today it got lighten up again and I'm so happy. Thank you so much ♥️

[fixinanddoinstuff]

Thanks for the video. 2 years of sitting on top of the tool box I was about to throw it away. Switch configuration was way off lol
Stretched the button spring to avoid it falling apart again. Thank you

[boblevey]

Thank you!
Very good job detailing this with pictures

[lawrencecuneaz]

I spent 2+ hours trying to put this damn flashlight back together because the switch end popped out. Had no idea the switch was directly touching the rubber... I had the the damn housing piece switched around. Thank you so so so fucking Watched your video and figured it out in 5

[Dmax]

i thought mine was broke . just before i tossed it i took it apart then decided to look on youtube as a last chance and there it is. you showed me and mine works. ty

[dylanvedia]

Useful video fixed my flashlight that I needed for work

[jimwaltosz]

Thank you again I got bored and wanted to fix my wifes flashlight switch. This showed me the way to take it apart. Mainly corrosion on the little contactor inside.

[davidr]

I purchased one of these lights and the orange rubber switch cover was sitting off to one side. I was unable to adjust it.
With the help of this video I was able to remove the tail cap and re-seat the cover. The cover did not come out easily. It was trapped on one 'corner'.
I placed the tail cap unit on a writing notepad to avoid any damage to the surface or the tail cap itself. Then I used a Philips head screwdriver to gently tap the 3 sides of the switch. This freed up enough room to release the cover. Another few taps and the switch was released.
Placed the rubber cover back in the hole and tapped the switch back. An easy fix. Thank you for your video. It will also be useful if I decide I want to upgrade or change the led.

[fatmanscoop]

Thank you for making this video! My flashlight kept switching between the different lighting modes by itself or sometimes it only turned on when i tapped it a few times. But with this video, i was able to take it apart and find the problem.

[estherwhitcomb]

Great video. I was wondering if you knew where to get the rubber o- ring or gaskets to the pill assy. One has broken.