ULTIMATE Microphone Breakdown | Rode Wireless Go vs Rode NTG 4 Plus with Zoom H6 Test

Testing and troubleshooting issues with the Rode Wireless Go and the Rode NTG 4 + recording to the BMPCC4K and the Zoom H6. So if you’re having issues with your system you can learn what I did to fix issues in your setup

I quickly find out that my BOYA BY-PB25 boom pole is defective during this test. After only using it on 4 projects the time has come to try to get a replacement from BOYA. I figured out what was wrong with it after swapping over to a different cable that plugs in directly to the NTG4 + using the Zoom H6. So if you’re having issues with noise or interference where your hearing a radio station of all things consider checking your cables and testing and swapping out to see what is defective that is causing your issue. audio issues are always a pain to deal with so be careful on set! Better safe than sorry!

🔴Please note as I may earn commissions from qualifying purchases that are linked below.

📚 Chapters:
0:00 Rode Wireless Go Vs Rode NTG 4 Plus
0:15 Rode Wireless Go Gen 1
2:00 NTG 4+ With Rode
2:50 Boya BY-25 Boom Pole issues
4:16 Rode Wireless Go Lav Issues and Boya Boom Mic

Lets Connect!

#rodemirophones #rodentg4plus #rodewirelessgo #rodevsrode #seezsantos #notatechchannel #ifyourreadingthisyourawesome

About this video: In this video, Seez Santos tests out the Rode Wireless Lav microphone that is directly connected to the right channel of the BMPCC4K. While at the same time recording the audio from the Rode NTG4 Plus to the left channel of the Black Magic Pocket Cinema Camera 4K. This is a test as well as a troubleshooting guide for those who are having audio issues with the BOYA BY-PB25 carbon fiber boom pole. As well as a test in audio quality from the Zoom H6 that is directly connected to the NTG4+ via XLR that is recording a WAV at the highest quality possible.

[BrandonON]

Great Video, Definitely I see the difference on audio

[adammcbride]

What if you put the headphone out from the recorder to the input on the rode wireless go?

[j.strong]

Hey, thanks! Just wondering if you've tried using the RODE Wireless Go to your camera, through the ZOOM H6. I'm thinking of doing that to avoid syncing in post but not sure how that works. Any thoughts, and how best to do it? Thanks again.

[FDJC]

Hi thank you for the video. Can you help me figure the following setup please. I currently use a simple Alvoxcon TG2 mic with my Canon M50. I am looking to purchase a RODE shotgun mic or similar product if you recommend but would like to be able to use both mics for interviews (the Alvoxcon and RODE for example). Is there a adapter that will take the input from both mics and place it in the input of the camera? Whats the best way to get sound from two different mics into one source or in my video through the camera or Smart phone?

[MegaPiatro]

Im new to audio but is there a way to have the rode wireless go record on mono channels into the zoom h6? the only way i can get the second channel to be picked up is if i have the rode wireless go set to stereo, otherwise only channel one transmitter is picked up