UC100 Motion USB Controller for my new CNC router

this is my new second cnc router to help with my g10 and wood workflow,
the machine is 3 foot x 4 foot working cutting area
with rappids easily in the 1000 range. in the video i was testing in 800 with 25 velocity setting

UC100 is a CNC motion controller. allows you to use any computer without parallel port to control your cnc router with mach3

so far its working as it should, super easy to install!

[Thinkflite]

Hey man, Awesome stuff. Really love your videos! Great Inspiation for me :) Been developing a quad over the past 11 months which has now been built and im working towards getting my own router to make them and other projects :) Thanks

[minitruckin]

im still hooking it up, but im using the PIN out from the driver board thats the PWM from mach3 into a relay breakout board that supplies switchable power to spindle. the breakout board im using is the c37 from cnc4pc

[minitruckin]

thanks! :) you get one be prepared to devote plenty time to it lol

[minitruckin]

hi im running that laptop windows 7 ultimate @ 32bit, thanks for looking

[serhioromano]

Do I understand right that I can connect this UC100 to any MACH3 compatible breakout board which is connected to dives. 

What I mean I do not understand how it separated drives? I

[PROTOindustrialMX]

Hello pal, great rapids there... Are you using stepper motors or servo motors? What it's your transmission power: belts, rack and pinion or ball screws? Regards

[michaelshondel]

Hi... did you have any problems with inside/outside offsets? No matter what I did the offsets wouldn't show up in the cut.

[danatwindlip]

Hi there, I see you have a macbook pro and you say you are running win7 32bit. I am guessing you installed via boot camp, or??? The reason i ask is because I am trying to load my UC100. and I am running into installation problems with the drivers via bootcamp/win7 64bt (as the controller recommends 64bt) Did you have any problems with your installation? Thanks in advance

[ztd]

I'm working on a school project and I'm using the UC100, and the same driver. I'm having issues and have blown up one board already and  cant figure out what simple thing I'm doing wrong. My motors are 18Kg circuit specialist motors rated at 2.5A. Can anyone point me to a good video or blog to get this working or share your setup. I have two weeks left to finish the project so I'm hoping someone will be able to lend expertise it would be greatly appreciated. Ive tried Unipolar with 24V on the center taps. Currently i have the center taps  tied together on each coil and still nothing. If i can provide more info let me know. Thank you again

[TheAlessiodb]

hello may I ask if the UC100 will also work with mach3 with windows 10 ?

[DiegoVaIencia]

which OS do you have?.. and 32 bits or 64 bits?