Wedge Cutting Jig and Resaw

preview_player
Показать описание
  1. Steve Garrison
  2. Steve Garrison
  3. resaw
  4. wood shells
  5. cutting wedges
  6. vacuum clamp
Рекомендации по теме
Wedge Cutting Jig 0:15:26

Wedge Cutting Jig and Resaw

Wedge Jig 0:03:41

Wedge Jig

Absolute Rescue Tips: 0:01:56

Absolute Rescue Tips: 2x4 Wedge Jig

Making a simple 0:00:19

Making a simple wedge/shim jig for the bandsaw! #woodworking #jig #howto #simple #shorts

Morgan Resaw Wedge 0:00:45

Morgan Resaw Wedge Belt

Cutting Identical Wedges 0:00:14

Cutting Identical Wedges Using a Bandsaw Jig #shorts #woodworking #handmade #diy

How to make 0:04:15

How to make wedges for mortice and tenons on a bandsaw taper jig

How To Make 0:01:02

How To Make A Quick 3 Minute Resaw Jig For A Bandsaw // Woodworking Tips

Bandsaw Jigs Best 0:09:21

Bandsaw Jigs Best 4 for Your Woodworking Shop #woodworking including circle cutting, crosscut sled

Tips for cutting 0:00:12

Tips for cutting circles #woodworking #Tutorial #diy #circle #jig #howto #cut #circles #bandsaw

Set up and 0:09:45

Set up and run of wedge saw

Wedge Saw 0:00:55

Wedge Saw

Simply Great Bandsaw 0:33:24

Simply Great Bandsaw Jigs

Axe Wedge Jig 0:03:24

Axe Wedge Jig (3 Min) - Make your own

How To Make 0:05:24

How To Make A Bandsaw Cutting Jig For Pattern Woodworking | 1412 Bandsaw

Cutting Thin Strips 0:03:05

Cutting Thin Strips at Table Saw

Bandsaw Segment cutting 0:04:15

Bandsaw Segment cutting jig

WOODEN WEDGES FOR 0:04:33

WOODEN WEDGES FOR JOE PIE

5 Bandsaw Jigs 0:06:57

5 Bandsaw Jigs You Need

Bandsaw Wedge And 0:03:20

Bandsaw Wedge And Shim Jig

Jigs for Resawing 0:06:59

Jigs for Resawing on the Bandsaw

More From Your 0:03:25

More From Your Bandsaw

Resawing and planing 0:00:14

Resawing and planing ambrosia maple, those @WhiskeyRiverTradingCo wedges work for more than axes

OTOW Wood Shop 0:04:55

OTOW Wood Shop Large Bandsaw Jig

Комментарии
Автор

Brilliant Steve, had all sorts of problems cutting on the table saw, currently using a bandsaw and jig on my thicknesser to finish off. Will be making one of these very soon.

Steve-lhby
Автор

A vaccum clamp is a great idea!Great video Steve!

JohnathonWhittaker
Автор

sweet ! a lot simpler design than the previous wedge jig .

charliewhite
Автор

It will be interesting to see what could be produced using a compound cut.

garybeasley
Автор

Thanks Steve for showing us. I am no good at making Jigs so therefore I have not been able to make any of your designs, although I have purchased most of the patterns. *sigh*

wendysomerville
Автор

Hello Steve. Lovely work. Just started watching your videos. Thought I could share a tip I saw on crimson guitars YouTube channel. The video is called the greatest luthiers trick of all. Useful for holding wood in place, sandpaper to wood etc. I saw you use a glue gun in other videos but this is a good one for lots of applications. Maybe you already know but thought I’d share.
Cheers.

Ryanconnollytrom
Автор

Have you considered making groves on the raised panel of the vacuum part? On a CNC bed they have a honeycomb pattern for effective vacuum hold down. Just a idea. I like your design.

kennethbrinker
Автор

Has anyone tried or recommend using a 12" dual bevel sliding miter saw instead of a table? Would you still use the jig or not since miter excels at angle cuts?

smtn
Автор

what power is your vacuum pump? I'm looking at them and they are rated in CFM

simonsas
Автор

Please tell about the vacuum pump and where you got it.

RossNanfito