Watson Racing Bolt-In 4 Point Roll Bar for Mustang S550 2015+ (WR-15-BOLTINCAGE)

Quite simply the finest 4-point Mustang roll bar on the market.
What makes this 4-Point Bolt in Mustang Roll Bar different?

* Quick-In and Quick-Out design. Perfect for those of you who are part-time racers and don’t want a full-time roll bar. Uniquely-engineered bolt-in mounting system stays hidden and mounted in the car. Unbolt the Watson Mustang Roll Bar from INSIDE your car for quick removal and re-installation.

* Mounts to the FACTORY corner gussets. Other 4-point roll bars and roll cages in the market either bolt to the weak sheet metal floor behind the front seats (dangerous!), or replace the factory corner gussets with their own design. Why replace what Ford has already engineered and crash-tested? This is a critical strength point in your Mustang, and we did not want to replace it. The Watson Racing 4-Point Mustang roll bar bolts to this factory, high-strength gusset for maximum safety.

* Minimal trim panel modification. With our 4-Point Roll Bar’s quick-in, quick-out design, you don’t have to cut your trim panels AT ALL if you don’t want to. If you’d rather keep the trim panels and Roll Bar permanently mounted in the car, the modifications required to the trim panels are minimal. No cutting your time panels in half with our bar!

* Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum in order to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength.

* 100% TIG-welded 1.75”x.120”-wall DOM tubing. 100% powder coated. Shoulder harness retention loops, standard. Welded/fixed harness bar and diagonal bar, standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated heavy M10 metric fasteners included.

* Full seat travel. Since the Watson Mustang Roll Bar mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position.

* Bolts to the Ford-engineered corner gussets with heavy 1/8″thick steel plate. Don’t risk the strength of your car to flimsy aftermarket gussets.

* Precision-machined tube joints for rear two supports. TIG welded 360 degrees + plug welded. A seriously strong joint that is far superior to through-bolted slip-fit tubes.

- Shoulder harness retainers keep your belts in place.
- Constructed of heavy duty 1.75″ x .120″ DOM steel tube.
- Precision CNC Mandrel bending provides consistency & an exact fit every time.
- Standard fixed harness bar and diagonal cross brace.
- Fewer bends provide superior strength over other designs.
- Fully TIG Welded.
- Fully powder coated Watson Racing Carbon Gray

Purchase these parts directly from Steeda:

---

Steeda Website:

Steeda Performance Vehicles

Steeda Europe:

Steeda Facebook:

Steeda Instagram:

Steeda Twitter:

Steeda Blog:

#WatsonRacing #MustangRollBar #MustangParts #Mustang6G #MustangPerformance #Steeda #SpeedMatters

[wish]

A big THANKS go out to Brian Dopp & Matt for their professional recommendations and quality install !!

[MattChristie]

I've had one in my EcoBoost S550 for 2 years and its been awesome! It is out of the car now though and ready to go into the next one I hope to get this spring! Its a lot like the one in the video except red with no stripes :)

[RLCPLUMBINGLLC]

Thank you for what you do I enjoyed the video

[EnglishElvish]

Didn't see this Rollbar on your website, just the Autopower brand.

[larryhernandez]

Excellent content . . . . Stay Frosty Steeda

[leoncope]

My ?? Is how much for the kit & install, I been wanting to do a rear delete & roll cage,

[FYMM]

Can a roll cage be installed and still have space to put longer items from trunk up into rear of front seats ??

[brianwallace]

Can you add on to this roll cage in the future if required?

[tekman]

I checked out your web site . I don’t see this cage anywhere on your site ? Did you stop carrying it

[EnglishElvish]

I don't see this roll bar on your website, is it still available?

[angelobovara]

I have one. Local shop wants $1700 to install it and I have the back seat removed.
Sounds like too much.

[tjones]

Is this NHRA compliant for a 8 second car?

[markboen]

Why would you want to promote a DOM tubing roll cage over a ProMoly (4130), or even better, Docol R8? The Docol R8 is lighter and stronger than DOM.