How To Fix Squeaky Stairs LIKE A PRO But DIY!

In this video I'll show you how to fix creaking stairs from above, if you don't have access underneath your squeaky stairs. Ill also show how to fix squeaky stairs from underneath in two easy DIY way!

Here are some of the soundproofing material I recommend. These are affiliate links that gives me a commission at no extra cost to you. Thank you for supporting my Channel!

Using these products will definitely get you on your way to fix your squeaking stairs. From using some dry graphite in between the risers and stringers or using screws to crew them tightly together.

These links will show you how to soundproof a door using many different types of products. From changing a hollow core door to a solid core door to use mass loaded vinyl to make it not better soundproof but it also works better for sound deadening a room.

Bear in mind that some of the links in this video are affiliate links, and if you go through them to make a purchase, I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you.

Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational,​ or personal use tips the balance in favor of fair use.

Consider SUBSCRIBING if you like this content! Thank You!

[victoriakidder]

WOW if someone is giving you the information you need and basically giving you advice on what to do you should appreciate it . Some people want not only the information but they want it done for them🤦‍♀️

[juanchomartin]

it would be nice to show people how to do it instead of talking and showing where the problem (i cant wait people's reaction towards me.... let's see....) but if people do not have access underneath the

[christinarobertson]

Great video, very informative! I'm going to do this right away as it's been driving me crazy!
Not sure if others aren't seeing your entire video, so many people asking about not having access to the bottom of the stairs (and some quite hateful ones at that!). Perhaps they aren't listening before they make their rude comments!

[ShanIAmBalance]

I’m going to take another look including underneath but likely that last one. Thanks!

[joshhaslam]

Tackling my squeaks today in UK! Plasterboard removed under stairs, wood adhesive applied, screws pre drilled to prevent cracking, next for PIR staircase LEDs then a layer of kingspan going in before new plasterboard

[redbluecube]

Verry helpful
i am gona apply soon its realy annoying when doors or stair squek 😊 thank you sir

[loganbyrne]

what if it a second story stairs and no access to underneath?

[pysnyug]

With no access under stairs, the actual stair tread moves when you step on it in the middle and there is a gap at the front above the riser when no weight is on it, how do you fix this? Put glue in and try and screw it from above?

[Rnn]

I have carpet over my stairs and no access under the stairs. Are there any simple tightening nails/tools to fix squeaks without removing the carpet? Thanks

[sandrafagan]

How long does a staircase last in council housing? And if there is a lot of creaking what would be te best method to do anyone ?

[Steve_Hayden]

Ok, but my problem is my floor is carpeted and I have no access underneath the stairwell.
Now what?

[joyceh]

If I use powdered graphite first for a temporary fix, will I be able to use the construction adhesive later? I cannot access the underside of the stairs.

[mufuliramark]

I learn far better by being shown how to do something than being spouted to….

[aarondrossart]

I'm putting a dog room under my stairs in a couple weeks, so I'm just going to glue and screw when I'm under there. easy peasy.

[pavlo]

I have my stairs stripped down to the utility 1" pine they were built with. Preparing to install oak treads and risers made from 1/2" maple plywood (and I finished them). I cannot access underneath stairs without removing drywall. I've tried drilling 3 pocket holes into the tread and can 'pull' the riser tighter against the rear of tread. Before tightening the screws, I 'injected' Titebond glue down into the rougly 1/16" crack. Then I tightened the pocket screws (1 in middle, and 1 on each side) and the crack tightened up and glue squeezed out. 8 hours later, still squeaking. I was also thinking of injecting melted paraffin wax down into the crack. will the oak treads, glued down with urethan glue help the strength.

[Call_Me_Gallagher]

You know you’re a shady pos when you tell people to fix a problem temporarily for the sale of a house.

[rsx]

i have another question lol Could i cut Sonopan to put in between the framing of a interior wall and then use safe and sound on top? So it would be Sono, S&S, RC and then drywall.

[mazdakmorati]

I thought you would be showing us how to do it as oppose to just talking about it. I just wasted 5 minutes that I will never get back. 😡

[bradleyharless]

Not really cool to recommend this to aid realtors and hide something from buyers. Home buying is a nightmare enough without people actively making it worse.

[TheStigma]

"Fixing" a thing like this temporarily just long enough to sell it is a really dick move. It feels a bit in the same way as painting over your water damage or mold knowing full well it doesn't address the problem.