Abandoned 1946 international new carb!

[theetravisb]

Go watch the full videos on my channel thanks 🫡

[victormendoza]

Bro finding that original crank to start the truck by hand is like a unicorn

You know how many 20 year old pick ups can not ever find the original equipment to lower that spare tire??
That’s the best thing I’ve seen all week

[roberthein]

If you let the mystery oil set in, a week, it will loosen the rust, it will turn.
But with all that oil, it will smoke, after a while, when started.

[savagebolt]

The first thing I thought was, blow the rust off around the plugs with compressed air. The second thing was Marvel Mystery Oil.

[terryeustice]

Hope and wish you success on this old International.

[mikegamba]

When I was a teenager my buddy seized up his dodge with a 318. His dad who was born in the early 1940s goes go buy my a big can of marvel mystery oil needless to say he has that damn truck unseized and running by the next day. I learned a lot from Bob he also cooked liver and onions so good you thought you were eating steak

[dannymaas]

Asitone and trans fluid works good and a block heater

[curiousgeorge]

You might want to just simply hook up a extended drive to the oil pump and pressurize the system properly before even moving the engine anywhere

[paulsilva]

I would have used the Marvel Mystery Oil first thing and waited a week to two weeks

[trevorlhastie]

Should have cleaned the top of the engine off. There's dirt that can get in the sparkplug hole. That dirt can mess many things in the engine up down & sideways.

[megadeuz]

Use a pry bar on the flywheel and rock the motor back and forth to break the rust loose.

[bluebeard]

The moment I heard you say you can't just try to turn it over because it's been sitting too long, I honestly want to hug you man. As someone who's been restoring antique motorcycle engines my whole life, you are the first person who's video but hasn't made me want to bash somebody's head into the wall.

[bradwalsh]

I use a mixture of 50% ATF and 50% acetone.. way cheaper and works great

[blake]

Use a high intensity impact wrench followed by a breaker bar, but first let the penetrating oil have time to work preferably overnight

[ellsworth]

You're going to have to bust that engine open

[randominternetuser]

Make sure you don't clean the dirt off first so you get some of it down in the cylinders while the spark plugs are out. Carried down into the cylinders with your favorite lubricant 🤣
Ever heard "cleanliness is next to racecar-ness"? Look into it.

[lensundialwoods]

The spark plugs, the dust on top of the engine, that sums it up and sends the whole project to an early grave. May we have a moment of silence for the condemned? I think I'm getting asthma from thinking about it.

[ampman]

Marvel’s mystery oil is a go too main staple in my garage. I replace a quart of oil in my wrangler and it runs like a top!!!

[edwhitson]

Overfill the crankcase with oil too. Also if it's a distributor driven oil pump, get a drill and spin the oil pump too

[Mebot]

Glad you posted this one, was curious about this