M-Vave MS-1 to Cube Suite Tutorial: How to setup M-Vave MS-1 in Cube Suite | M-Vave MS-1 to Android

Title: M-Vave MS-1 to Cube Suite Tutorial: How to setup M-Vave MS-1 in Cube Suite | M-Vave MS-1 to Android

Buy here👇👇
M-Vave Chocolate MIDI Controller:

M-Vave MS-1 Wireless Receiver

Zoom MS70-CDR

Hello Pedal Nerds! In today's video, I'm going to walk you through on how to connect and setup the M-Vave MS-1 to the Cube Suite App for android.

Watch the entire video to know how. Enjoy and thanks for watching!

M-Vave MS-1 Unboxing and Explanation Video:

Keywords:
m-vave ms-1 to cube suite app
m-vave wireless midi to cube suite app
m-vave ms-1 wireless system to cube suite app
how to setup m-vave ms-1 in cube suite app

m-vave ms-1 to android phone
m-vave ms-1 wireless system to android phone
m-vave wireless midi to android phone

m-vave wireless midi system
m-vave ms-1 wireless midi system
m-vave wireless receiver
m-vave ms-1 wireless receiver

m-vave wireless midi system demo
m-vave ms-1 wireless midi system demo
m-vave wireless receiver demo
m-vave ms-1 wireless receiver demo

#mvavewirelessmidisystem

[mickeygreenbaum]

First, Ehrosmith, if you are reading this, I just want to thank you for your tutorials. They’re hugely appreciated. If I ever get this to work, it is only thanks to you!

However, I seem to be having the same problem as EnterYourName. At first it was working, but after updating the firmware on the MS-1, it no longer works with my Zoom MS-50G.
It worked initially with my Zoom MS-50G using my phone and Midi Commander (while I waited for the Chocolate to arrive). I then updated the firmware on the MS-1. Then the Chocolate arrived. Now it works with neither the Midi Commander or the Chocolate. It shows up in CubeSuite, etc., but no longer seems to work for sending midi to the Zoom MS-50G.

[BenedictBeekhoo]

Thank you, this has opened a realm of possibilities.

[GreatKukuruzo]

Hello, and thanks VERY much for your tutorials. However I got a problem (probably after updating the firmware on MS-1, but I'm not sure). So I have MS-1, Chocolate and MS-50G. I've followed the tutorial with Advanced mode settings for the Chocolate and it instantly worked, there was no problems (Note - I powered MS-1 by plugging in to the power bank, then connected it to MS-50g with a USB cord and thus the MS-50g was also powered from the same USB port of the power band, there were no external power supplies and still it worked and I could switch presets).

Then I've decided to update the firmware MS-1 and to switch to Program Change A mode for the Chocolate and since that moment I'm not able to make the whole system work for ANY mode ( Program Change A, Program Change B, Advanced mode - none of them work.) I've tried to power MS-50g with a separate power supply, MS-1 was powered by the power bank (not sure which mode should I use OTG or HOST), but still it doesn't work.

I thought that MS-1 could be dead after upgrading, connected it to the PC and launched Cube Suit for Windows - it only shows Firmware upgrade line, no MS-1 logo or anything - is the same for you? Do you have .dat firmware files that could be used in Cube Suite for MS-1, probably some old firmwares?

Then I checked MS-1 in the DAW - it works, sends and receives MIDI commands.
However I can't use it with the Zoom MS-50g at all. Could you please help me somehow?

Thanks in advance for your work

[nookcyan]

Thanks Bro! Do you know where we could download the firmware to have as back-up, just in case?

[Starbld_]

I have achieved 50% success. For some reason I can connect to the B (usb) dongle in cubesuite and configure it for client mode.

I want to do the same for the A (two 5pin) dongle. I've updated the firmware using sincoOTA from the official site. But, cubesuite says firmware must be upgraded.

What am I missing?

[michalmayer]

my ms1 MidiA (two 5pin) is shown in cube suite (android) as MidiB (usb dongle), when is power both, it is not possible use it, becuse both are midiB. how to solve it ?

[alexisdemesa]

sir Ehrosmith yung sakin po kasi wala lumalabas na OTA upgrade sa cubesuite ko di po ako makapag upgrade di ko po tuloy mapagana controller ko sa mg30

[piotrb]

I have a problem with my chocolate.
After saving the settings, everything works, when I turn chocolate off and on, the settings disappear.
I tried Cubesuit Android and PC. I set specific PCs under the switches and save them. What else should I do?

[stephenpertesis]

but...what IS Cubesuit? I need a concept for what this does/can do. Thanks!

[okcin]

Any idea kung gagana po ito sa Katana Librarian using IOS device?

[chocolocostyle]

Pe help po. Ayaw po mag connect yung chocolate midi sa MidiportB naka host mode naman pero ayaw gumana

[jplee]

Can you pair multiple Mwave Chocolate footswitches to a single midi BT receiver?

[AryBagus]

Hello sir, i want to ask. My amp is yamaha thr10ii and it can be controlled over my phone with yamaha thr remote app. I buy this mvave footswitch midi controller without the dongle and it seems like my phone cant detect my footswitch on thr remote app. What should i do? Can the dongle make this problem solved?

[GreyJadia]

Please help..mine wont detect by cubesuite..hope you can help me

[jhonnyrossbongcaras]

Need po ba isaksak pak naka on na controller? May ms50g kasi ako

[elgeetunacao]

does this comes with the footswitch or you have to buy separately?

[marvinbayrante]

Thank you for the very informative video. However, I'm having issues connecting MS-1 to cube suite app. It's not connecting at all. Tried using cube suit on my laptop and launched Cube Suit for Windows - it only shows Firmware upgrade line, no MS-1 logo or anything - is the same for you? Do you have .dat firmware files that could be used in Cube Suite for MS-1, probably some old firmwares?

[mjt]

Hi! Do you happen to have a copy of the app for android? I can't seem to download it from the website. Tried other methods pero wala pa rin.

[JohnSAitken]

This can connect via Bluetooth as well, without an app

[jeyatee]

sinunod ko ito nilagay ko sa host only mode pero ayaw pa rin gumana sa nux mg-30 ko. bakit kaya?? kung PC gamitin ko may nakalagay firmware update tapos pag inapdate wala namang file makikita. san ba makita support firmware ntio? Ayaw talaga gumana sa nux mg-30 ko eh