UPPAbaby Mesa Instructional Video: Base Installation with LATCH

An industry first, UPPAbaby Mesa’s SmartSecure™ system provides parents with visual confirmation that their seat is installed correctly. Learn how simple it is to properly install your Mesa Infant Car Seat using LATCH.

[georgenelson]

from Joel: This base is infinitely easier to install than other baby seats I've wrestled with in the past 40+ years. Kudos to the engineers who designed it!

[Heddrick]

If you level the seat, then apply pressure to the rear after its latched, doesn’t this remove it from it’s level?

[UPPAbabyCo]

To make sure you've installed the MESA correctly, you can follow these safety checks:
-Base doesn’t move more than 1 in side to
side at the belt path.
-Ensure tightness indicator is green after
each use. If it is not, apply pressure by
pushing base into seat bight (crease of
seat) to tighten.
-Lower anchor belts are secure and
untwisted.
-Recline angle is correct. Base is level
when only green is visible between the
two arrows on the level indicator. No red
should be visible.

[arronramlogan]

I followed this instructional video to install my Mesa base using the anchors provided. However, the front of the base (which is not anchored and pointing to the front of the car), moves a tremendous amount about 4 to 6 inches! How can I rectify the situation?

[sandiegosun]

Do I need to use these latches and the seat beat at the same time, or is it one or the other.

[ozgepasin]

Hello, Is this product compatible with other brands of strollers?

[chrisskim]

Do you recommend putting this car seat in the rear middle seat or behind passenger side is okay?

[jermitol]

Vehicle anchor explanation is non-existent

[sven_the_giant]

I'm attempting to install this in a 2022 Mazada cx5 and my hands are too large to fit in between the seats. Attaching the lower anchor connectors is almost impossible.

[becschillaci]

They should sell a grandma base at a cheaper add-on😃