Brake fluid flush kit without removing wheels #shorts

This Brake fluid flush kit allow you to flush brake fluid without removing wheels

[hamidizadi]

If you suck too much fluid from the master cylinder you run the risk of it running too dry and as a result you might have to bleed the master. Just bleed the calipers and add fluid as you bleed.

[selfmade]

Best content around and he gets straight to the point

[chadpugh]

Does it matter if brake is disassembled? Replacing a wheel cylinder and dont want ANY old nasty fluid into the new cylinder. Thx.

[tonyjordan]

How are you avoiding getting air into the system using this method???

[yusuf.on.youtube]

Is there any chance if the breakfluid is very dengerous already and take it all from the system? And put new 😢😢😢 i got a big problem

[sunnyd]

Not a good idea to do like this, the best way is traditional way of bleeding old brake oil from bleeding nut near calliper from rear wheel first and then front right and then remaining two wheels, we should never empty the brake reservoir and keep on adding new brake oil above min level unless all the old brake oil gets out as any little air in system is too much dangerous..it will take some time but that is the safest way to clean brake system.

[darianthompson]

Does your disintegrate after use? The brake fluid makes it real brittle

[myk]

Making it look so easy 😂 Fellow mechanic here 🧑‍🔧

[sistercalhoun]

What's the name of the section device you're bleeding brakes with can you tell me the name so I can get one ?

[Cerebro]

Excelente hermano buen procedimiento para cambiar el líquido de los frenos. Está herramienta tipo bolígrafo nunca la había visto.

[GagandeepSingh-jvvk]

Brake fluid is hygroscopic, you’re dumb to just introduce air into the system like that, never let it go completely down even when bleeding brakes.
Now you will have to bleed the whole system for air particles and bad fluid.
Good luck with that now!! 😂

[badkarma]

Don’t rely on this tool, it will provide bad info. Get a better one, this one has to many bad reports and people changing brake fluid when not needed.

[kmatax]

This would be great if we all had a lift…

[wolverinepl]

thats the name of tool you used to pump out old fluid?

[ibond]

Could you send a link with this led indicator please? Or what is it calls?

[fiskerwastaken]

Man you cant se the real boiling degree in the fluid resavoir! You need to test some of the fluid in the pipes at the wheel... The fluid in the top of the resevoir is not pure brake fluid its filled with condense water from when the fluid gets hot and cools down.

[taz]

This dude just pushed air into his system

[fozzir]

if you follow this method you are a fool. and that tester, it's a joke.

[DIEdayORelse]

damn all that air and putty fluid is nasty, just about anyone who's bought a newer car w/ poor maintenance has dealt with this. Hard to get the bubbles out without a device like this btw (either that or run a bleed procedure on your scan tool if applicable)

[driftitlikeyouownit]

You seriouslt used an led inducator to tell if thst fluid wad old 😂😂😂😂😂 just look at the color. You online mechanics are somthing special