MikroTik IPsec Site to Site VPN Configuration

MikroTik Site to Site IPsec VPN ensures an encrypted and authenticated secure tunnel between two routers across public network. So, local networks of these routers can securely send and receive data packets through this IPsec VPN Tunnel as if they were directly connected at the same switch or router.

[suezhills]

You are the BEST online simple and consentreted go... forward friend you made my job

[muhammadasjad]

Do we need static ip to create vpn between two branches?
Or we can use dynamic ip??

[ivic]

Excellent video, fast and up to point!!!
Thanks for sharing!

[merabgogoladze]

thx a lot... and one question that I have is how to create stable communication between of two of them if I have a failover... if session dies, tunnel would be destroyed... how it can be possible to prevent disconnecting from VPN session?

[princeofori]

great work
but my case is, office 1 router has public Ip address but office 2 is on 4g network.
what can I do

[AliShah]

Hello
I have done the same settings in my MikroTik version 6.48.4 but unable to mature VPN connectivity. What could be the issue?

[stephenochieng]

Amazing piece of art this is a wonderfull solution

[solankiitsolutions]

Thanks, really nice video. can you let me know mentioned below configuration we can do in Mikrotik CCR 1009 router

ISAKMP Encryption Scheme (AES 256) AES-256
ISAKMP Integrity Authentication Scheme (SHA 512) SHA 512
Diffie-Hellman Group (group14) GROUP 14
ISAKMP Lifetime 86400 Sec
NAT-T Disabled
IKE Keep-alive Enabled
Dead Peer Detection Enabled
IKE Version (V1 or V2) V2

[abhijitnalavade]

i have Data center site public ip and remote site dynamic ip..so can we establish tunnel those scenario ?

[makoloherbert]

Hello Sir,
Can I use this setup to establish a connection between two routers at different geographical branches. My goal is to connect the two networks at the branches
Thank you

[danieltobon]

Hi Bro how many connection can you do simultaneous I mean Site A to Site B and Site A to Site C, etc..

[patopattone]

Great video!!! I'd successfully setup an ipsec tunnel between two office thanks to you. Now I'm trying to setup a second tunnel to connect another office but it's not working and I don't know why. I have office A y office B connected but when I try to connect office A with office C it fails. I did exactly the same setup for both tunnels (the only diference are te IPs). Any idea?? Thanks in advance

[jakeluna]

if i have 1Gbps openvpn, is it possible to share this bandwidth to the other site?

[zkalayci]

Selamın Aleyküm kardeşim. Allah razı olsun. Emeğine sağlık. Kurban bayramın mübarek olsun.

[hexoroid]

How did you plugin to mikrotika? To configure them do you have two nic cards?

[worldtechnologykuwait]

Hello, I did as explained in video, but transfer rate while copying files is slow around 700 to 800 kbps, can you please hlelp, MKT to MKT bandwidth test is approx 50 mbps

[voicecommunication]

Thanks ! Is I need Static Public IP Address ? For Both Sides For That From both Site 1 and Site 2 ISP

[shaonkumar]

Thanks for your nice hard work! I have a question to you during IPSec policy and proposal configuration and TAT rule configuration you have used src address and dst address 10.10.11.0/24 and 10.10.12.0/24 is which addresses these are? Is it network address of R1 LAN and R2 LAN. why you have used it?

[asarkhan]

Hello can help to configure hub and spoke ipsec

[dawarashfaq]

what is the network configuration of your virtual machine