How to Replace MAP Sensor 2005-2010 Chevrolet Cobalt

Buy Now!

This video shows you how to install a new MAP sensor from TRQ that is designed to perfectly fit your 2005-2010 Chevrolet Cobalt. The Manifold Absolute Pressure (MAP) sensor measures the air coming into your fuel injected engine to determine how much fuel to add to get the right mix. A failing or failed sensor will contribute to rough or inefficient running engines. It will likely also trigger a check engine light. Replacing a failed sensor should be a priority.

This repair was done on a 2006 Chevrolet Cobalt LS 2.2L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Hose Pliers

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[adamslater]

you dont need to take off the throttle body, just remove the clips holding the harness onto the fuel rail and move out of the way. Enough access is available to replace with just intake tube/box off.

[jaredcraig]

Is this the same for a 2006 2.2 liter Malibu?

[peralez]

replaced, fixed the super rough and low rpm idle, as well as the code

[eyeonart]

That one you are holding is for a 2.4 LT.

[eyeonart]

My 2008 Chevy cobalt LT 2.2 liter AutoZone shows totally different map sensor

[davemiller]

Very helpful. I have a P0106 error code 2010 cobalt

[jazzysmith]

Is it normal for the throttle body to smell like gas in there if not what can this be and what do I need to replace