How to program the remote for your motorized shades

In this video we cover:
Preparing and using your remote
Saving and changing limit settings
Setting up and using your favorite position
Adjusting your motor speed
and performing a factory reset!

If you need help or have other questions, feel free to give us a call! Our customer service team is standing by!

[CatalysticLeap]

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip
1. Go to a blind you want to program and select the desired channel on your remote
2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades.
3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test.

I didn’t try how to favorite a position but so far I have the desired settings.

[mrsamswong]

How do we set the up/down mode so that one quick press (either up or down) and the blinds automatically go (up or down) without me needing to keep pressing down the button?

[wilp]

How do you program two shades to one channel?

[sueellengary]

Thank you = BIG help! Why couldn't I find a link to this on your website?

[anitadannunzio]

Where is video for motorized sheer shades? Can't get remote to switch to sheer mode for opening and closing veins. Up/down buttons will only lower and raise shade.