Control your device from anywhere using ESP8266.....Simplest way IOT #1

Hi everyone,
As we know everyone hopes to be able to control and access
his home devices from anywhere by simplest and easiest way.
So In this video, I'm going to show you how easy to make an IOT
device using ESP8266 or NodeMCU you can use anyone you want.
NodeMCU supports more devices than ESP8266.
First, we will connect the Esp8266 with Arduino UNO then Reset it
by grounding the reset pin. Thus, we can Upload the Sketch to ESP8226

In this project, we actually turn the ESP to a web server for analysing the HTTP requests to execute the right command.

Just for the beginning, I will use the ESP8266 because it's small and handy.

Note:
To Reset the ESP8266 for Uploading the sketch:
connect the GPIO0 pin to GND and the reset pin to GND.
If you want to Restart it just connect the reset pin to GND
and be sure the GPIO2 pin is disconnected.

To add the ESP boards to Arduino IDE here the custom URL:

If you have a problem with uploading the code:
1- Check if the reset and the CH_PD pins are pulling up to 3.3v.
2- Check if the GPIO0 pin is grounded.
3- Arduino Rx to ESP Rx
4- Arduino Tx to ESP Tx
5- Arduino reset pin is grounded
-----------------------------------------------------------------------------------------------------------
Here's the ESP8266 code:
-----------------------------------------------------------------------------------------------------------
Here's the diagram ESP wiring with the Arduino:
-----------------------------------------------------------------------------------------------------------
Music: x50 - Penguin (Vlog No Copyright Music)
-----------------------------------------------------------------------------------------------------------
If you like this video don't forget to Like and Share.
Don't be a stranger, hit the Subscribe button, It will be awesome having you here.
Comment if you have any questions.
Thanks for watching.

[retribution]

From beginner's perspective... Can you make another repeated video of very detailed explanation... Cause it doesn't exist on YouTube.

What all software to download... Everything!!

[pcibra]

very good project, thanks for sharing it
It will be awesome if you can make a weather station with a web interface.
thanks a lot for your time.

[madhavareddy]

Total cost how much for this project bro

[drelectronics]

Sir can u provide me a code in which I want to connect ir proximity sensor for auto water dispenser such as when I bring glass near the sensor it will start timer and dispense water and if I remove the glass as per my need, before time ends, it must stop automatically so that there is no wastage of water anymore. Hope u reply 🙂

[muhammadshakil]

Its not from anywhere.its only from LAN

[drelectronics]

Bro i guess ur not replying me
For ir controller code
Cause it's urgent can u pls do that🙏🙏🙏🙏

[matiastorres]

muchas gracias me funcionó para controlar un ESP8266 con una red remota

[aieshahsasuke]

Hi, I'm using Arduino mega as my controller to do fingerprint attendance, can I use this wifi module to upload data to server?