Xiaomi Redmi 9 Screen and Frame Replacement

in this video im doing a screen swap on a Xiaomi Redmi 9

here is where i brought the part

================================================

================================================
Tools that i use frequently that are Ali-express Affiliate linked

This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.

my go to glue for almost everything now days!

Used to open ipad and remove glued back covers on phones

When using the heat gun near sensitive parts, its best to cover them
With this to protect them

The usual tape i use on most repairs, on screens

For things that need more Stick!,usually on tablet digitizers

A Similar tool kit to mine, that i use for those random screws that you dont normally see

My Soldering Station i use, so far it has been good

This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase

Advanced readouts of power draw on devices

A Simple Amp tester to see if your charger is actually putting out power

The Black Tweezers i use in my videos

This is the same as the metal pry tool i use, different brand printed on it

A New Version of the pry tools

This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed

The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job

One page i go to when I'm curious what new repair tools are out is:

[toptnc]

Thank you. I have just finished to swap my daughter's redmi 9 screen following your instructions. I have replaced the battery too because after 4 years removing the old one without damaging it seems to hard to me, and 4 years is a good period of time for changing it.

[ThiagoStocco]

Thank you very much for this!

Just finished swapping my son's redmi 9's screen, I just had a little trouble putting the motherboard back in. It seems like you gotta put the left side first, either way it won't fit right.

Another note: I managed to get the battery out by just streching the tape behind it, yout got to pull it upwards, it comes all off pretty smooth, no alcohol needed.

Thanks again :)

[mohamedhomes]

❤♥👋You are the teacher of a generation, my friend

[wernerabel]

Thanks for the video, i was lucky to remove the batterystripes, we have the same system for pictureframes, so it helps to pull flat and slowly with time. When thebattery lifts a bit, put something under and after the stripe pulls longer and longer..at least out

[javiersoubelet]

I tried to remove the battery with a metal crowbar, it was stuck too much, the edge of the battery bent a bit. It is dangerous?

[teoandgyolo]

I have a question....what if u dont heat up any of the parts u supposed to

also can u use a hair dryer for heating up ??

[nwarsvlog]

What is the name of golden cheap look like on the upper part of the screen that you remove

[HAEJIxxi]

what phillips/cross screwdriver size did you use?

0.8? 1.5? 2.0? or other size

please answer thank you

[petitnicolas]

Hello, can you tell me the dimension of the double face tape you use at 6:31 ?

[admiralhel]

My son threw his phone. When i inspect the damage its the ribbon from lcd and ribbon from the battery. Can i change ribbon in lcd or do i have to change the whole screen.

[Freenbec]

I already replaced the lcd but some part didn't touch