How to Use Siser EasySubli TWO Ways

I thought a full tutorial on how to use Siser EasySubli may be helpful and I am showing you BOTH ways to use this product. You can print on it with a sublimation printer or you can press the material and then sublimate on top of it. For both of these methods, I am using a Cricut machine. You can opt to do a simple design and cut with scissors. I am sharing how to use EasySubli from Siser with a Sawgrass sublimation printer, an Epson EcoTank, and an Epson Surecolor. No matter which sublimation printer you have, one of these methods will work for you!

Links below may be affiliate links.

Where to buy printers:

Other supplies:
Cotton or dark-colored shirt
Lint Roller

Other videos you may enjoy:

Be sure to follow me on social as well!

#sisereasysubli

0:00 Introduction
0:34 Two methods
1:16 Supplies needed
2:02 Uploading image
3:14 Printing on a Sawgrass
3:51 Side to print on
4:23 Drying the ink
4:51 Cutting with a Cricut
6:20 Using a heat mask
7:38 Pressing EasySubli
8:28 Heat mask options
9:19 Adding offset for second method
10:47 Printing Epson SureColor
11:00 Printing Epson EcoTank
11:18 Issues with printing on EasySubli
13:04 Cutting without printing
13:50 Alignment trick
15:33 Second method of application
16:44 Comparing the methods
17:24 Which should you choose?
18:43 Wrap up

[Musicbird]

I finally used the first method today and WOW!!! My son-in-law is in musician and my daughter and I made him some merch for his show tomorrow night. The shirts turned out perfectly!

[itsjenga]

Any time I run into a problem, I know to come back to your videos. You're a crafting lifesaver! Thanks!

[MadeInWeldonTexas]

I so wish I'd seen your video sooner! After 2 ruined shirts and tons of ruined supplies, I finally got it right after watching YOUR video! I have an Epson -4850 with Hiipoo ink that I use for sublimation and I had an order for a dark blue shirt. I printed on A-Sub paper and sublimated it to the Siser easysubli HTV as shown in your video. I was making it so much more difficult than it should have been! Thanks again!

[nicholaslafferty]

Gotta say I appreciate you being here because I've learned a great deal from your content

[PSLaperriere]

This helped me so much! I love how mine turned out. I used the mask method. I didn't have any trouble removing the mask. I didn't pull off at an angle, but straight. Came right off. I used converted et2800 with hiipoo sublimation ink, and it printed beautifully. Cut with cricut maker 3, put through twice to cut at normal pressure. Used on Gildan 100% cotton purple shirt. Couldn't have done this method without your tutorial video!!!

[ItsMeTrish]

I'm glad I found this video, thanks so much. I saw nothing in the Amazon description about the Sawgrass printer and certain sublimation inks. I think I will return it all as it is expensive and since I have an Epson, I don't want to waste time or money trying to make it work. Thanks again!

[jerridyke]

I have watched 20-30 videos on EasiSubli and could not find which side to print on. Thank you, @AngieHolden for clarifying which side to print on! Your videos are informative and inclusive. Thank you!

[americanetchllc]

Thank you i was able to use the 2nd way on black cotton and turned out great using my Sawgrass!

[trytobeniceallthetimeoldla]

I would have used a pressing pad to raise the area of the shirt that needed to be in contact. Those neck and sleeve seams are in the way and pretty sure your pressure isn't as even as it could be. Or, I'd use my smaller press, then the seams would fall off the side of the platens and then you have even pressure. Just the way I was taught years ago and it makes sense. Thank you for your video.

[alisonrodwell]

I think you may have just saved my sanity! I have been trying to sublimate onto a high cotton content shirt and have managed so far to nail the image to anything but the shirt! Trying this step by step. Wish me luck!

[juliehuddleston]

Angie! Thank you. It turned out perfectly. I wish I could send you a picture!

[Neskylicious]

So your video helped me more than any other!! I finally got to sublimate my shirt perfectly. And btw i love your shirt.

[ruthpearson]

My Epson ecotank ET2850 won’t take the easysubli through either, so your method works perfectly for me. Thanks for sharing

[CyndeHerron]

You are such a good teacher and I love learning from you! Great answers and work arounds for beginners.

[patriciafox]

Good day,
I've just watched your video. Awesome.
Trying to figure out why my black box does not print on my printout when I print?
I see it before I say print. But it doesn't.
You are a great teacher.
Thank you, Pat

[elainedavison]

To cut Siser EasySubli on an Epsom Eco Tank printer, tape a piece of regular paper to the shiny side of the Siser EasySubli and feed it through the printer as you normally would. Works great.

[CreateITbyEli]

Love this, thank you for the detailed explanation on how to do these methods ❤.

[carlosdejesus]

Thanks for the video on the Easy Sublie. I did follow your instructions but I also used my Epson Eco Tank 4850 without any problems. I used my Cricut, moving the pinwheels and everything came out just fine. Keep those video coming, thanks

[jasminesumler]

Currently understand the struggle of the easy subli mask! Omg!!

[mirisfern]

I've just got your book delivered last night, it was the best surprise as it was scheduled to the end of the month. 🥰