How To Fix Sun Visor Not Staying Up, DIY Loose Visor Solved

How To Fix Sun Visor Not Staying Up, DIY Loose Visor Solved.
#howto #diy #auto #autorepair #tipsandtricks #tips #sunvisor #solved
#easyrepair.

hello everyone welcome back to multi-channel YouTube services and entertainments.

this sun visor keeps leaning down its loose and doesn't stay in place or up.

this video shows you a trick to solve this problem all you need is metal small clamp to clamp it on so it gives support and force it
easy fix.

this car is 2000 lexus rx300

please support our Channel ❤️ 🙏
you may like

thank you and all the best 👌 👍

[tammieaf]

Thanks for actually resolving the problem! All other videos I watched say "how to repair" and they should say "how to replace" because their idea of repairing it is to replace it with a new one. Mine looks brand new but it's floppy so I'd rather fix the flop and keep the original visor. Thanks again for presenting an economical solution!

[SzymekCRX]

That is so elegant! If You paint that clip to the color of the visor it would be perfect :)

[JoshuaLinn]

This is a very helpful video, thank you very much for posting.

[kentsparrow]

good idea ! i think i will use one clamp but then drill through the clamp holes and put a small bolt through it. then i can tighten the bolt to adjust the tension

[blakebrown]

You can actually open the top at the sewing seam and then drill a hole through under the metal bar where there's a piece of plastic that breaks. The plastic holds the pressure of a spring on the bar and it just breaks over time. If you drill a hole and put a bolt through it (cut bolt as short as possible while fitting a washer and nut over it) then cut off a tiny piece of plastic in the way on the opposite side then you can put the two halves back together (use some fabric tape to hold it tight after) and then pull the fabric lining back over and sew it back up at the top.

[serrios]

Very nice . I guess I will sell some clamps and make some crazy ass money

[JerseyRepresenting]

How did you figure it out? Or was it a trick you learned? Thank you! Greetings from Asbury Park, New Jersey USA!

[bmoreforlyfe]

Pretty cool. Dont wanna thrash it out like that tho.

[andrewboyles]

Very interesting! What thickness of metal bracket did you use and how long did it take you to form it to the correct angle on your bench vise?

[JoselitoRE]

Buen trabajo pero solo para quien tienes esas maquinas jeje

[davecurry]

At least he is having a go. All these negative comments, where are your videos ?

[ronvilardell]

Looks like crap. It's the other side that is the problem.😮

[njordan]

Everyone doesn't have the skills and tools you have. Some things are better off to just replace.

[lorenzowest]

Why in the world are you taking so long to explain how to tighten this up this is a waste of video time. I got bored in the first two minutes of watching this.