Microtech Ultratech Knife Disassemble and Assemble- After taking it apart Will it work?

I take my Authentic Microtech Ultratech Knife take it a part and put it back together

[pedalfaster]

Really like that your video covers the knife disassembly and reassembly in only 6 minutes. I can't stand those half hour long videos where the guy spends 20 minutes talking about every little part and piece. We're not rebuilding a cvt transmission, it's a freaking knife. Thanks

[robmacfpv]

Ultrasonic cleaner works really well to get all the junk out of the clip side. I usually just throw everything in. Also shoot the blade into a cardboard box to let the tension off the springs. It should be able to slide in and out easily and the button won’t activate it. Makes taking the knife apart that much easier. No pliers needed.

[SkewedVisionsGames]

Would love to see some comparisons between the clones of the internals. Keep up the good work!

[jasonbrown]

Tried to take mine apart to get pocket lint out. Damn thing exploded everywhere as soon as I took the cover off. Now I’m looking for a video to help me put it back together again to hope I didn’t lose any springs or anything. .

[eric_in_florida]

haha love it, you done good. Mine is still stiff a/f so I'm going to be taking it apart to see what I can do to make it better. I guess its possible to stretch the spring a little, if the oiling doesn't work. I'm seeing there are a lot of complaints about them being overly stiff out of the box. Could be a variation in the springs they get I suppose.

[thevillageyid]

Is it normal for the trigger/action button to be a bit loose? Kinda clicky?

[_wheels_passion]

Where can I find this tool for open the screws?

[dcamnc]

I've got a bunch of otf's. In my experience they work best when run nearly dry, just a light coat of remoil/clp. Too much lube (even ultralight) can easily gum them up. Just imo.

[Hungrybird]

Hey . How’s it going bro ? I was glad to hear things are on the up and up .

[Ramperhappy]

Nice one on just opening that puppy up and try to fix it yourself! Must feel way better than panicking and shipping it back to microtech :P i also understand what happened to the knife making it misfire. They put lithium greese on the spring to dampen the TWAANG sound, the wd40 probably made the greese go a bit thin and run down to the bottom making retrackting and locking the blade impossible because its pretty much a swimming pool. Im guessing you could use wd40 if the greese is gone. It does keep the knife nice and dry and a bit lubricated :P

[TheHunter]

you should have deployed it halfway (let the blade hit a table or something) before disassembling, that way the blade isn’t under spring pressure. Also, how tf did you pull the blade out without removing the stop pin??

[ToxicMasculinity-tq]

I have 30 dollar OTFs that look exactly the same inside, hard to believe this is a $300 plus dollar knife.