Arduino Tutorial 07: Matlab

Welcome to the seventh Arduino Tutorial from our Arduino Tutorial Series. In this tutorial we will learn how to connect Arduino to Matlab and how are they communicatng using the Serial Port. Also we will make an example where we will use Matlab to control the Arduino Board.

Like my page on Facebook:

Add me on Google+:

[gulhermepereira]

Thank you, I've just started to use matlab with arduino and your video helped me a lot

[MaHab]

Great basics about Arduino. A lot of tanks about contribution.

[RATSKCOR]

Does Matlab work with the Arduino Nano as well?

These are the greates tutorials I've ever seen by the way!

[djberg]

Great series, thank you for showing me more of the functionality of these little things.

[fernandoluis]

does 2:00 code : adio.pde, adioe.pde and all go inside arduino IDE first, before matlab?

[ganeshswaroop]

hello,
which board is better to use for connecting a camera ? raspberry pi or arduino

[neginnikafrooz]

Hi, I am trying to read the IMU GY-801 sensor orientation(Roll, Pitch, and Yaw) to control my robot. I have written the Arduino code and I can get the values in Arduino software. However, I had a hard time translating data to Matlab. I am using Arduino Uno R3, Matlab 2016a, and Arduino support package.
I appreciate if you could help me to do this. Thank you

[artekaz]

Hi
my little project does not work me
I see that the ground is left alone, in Scheme,
you forgive me if I'm wrong

thanks

[nabzero]

Is it still the same if I have a DHT (Humidity and Temp Sensor) input?

[sukrukorcoban]

can you share more videos about arduino and matlap because there isnt enough videos about that and ı need help about some subject such as I2C cominications on matlab and arduino

[HellSanta]

Hello,
May i know why when i tried to run, it says 'Connection unsuccessful, please make sure that the board is powered on, running a sketch provided with thepackage, and connected to the indicated serial port. You might also try to unplug and re-plug the USB cable before attempting a reconnection.' But i tried using arduino to run and it works.

[varun]

Hello,
thank you for the arduino tutorials
can we control (on/off only) 15 LED's using Matlab GUI and Arduino hardware, by assigning every LED a push button

[hlolkhautomation]

how can I plot digitalRead & analogRead !

[victrosou]

Hello, could you say if is possible to do the same for TM4C123?

[shyamkumar]

Need more explained and different tutorials

[AliAhmad-zvfv]

hello
I try the same connection but always give me the following error message

{Warning: Unsuccessful read: The input buffer was filled before the Terminator was reached. 
Error using arduino (line 102)
Connection unsuccessful, please make sure that the Arduino is powered on, running either
srv.pde, adiosrv.pde or mororsrv.pde, and that the board is connected to the indicated
serial port. You might also try to unplug and re-plug the USB cable before attempting a
reconnection.

Error in Untitled3 (line 2)
a = arduino('COM4');   }

[shaguftaandleeb]

How we can write ultrasonic code in Matlab?

[UtsavShah_iitgn]

what if i want to connect two quadrature encoders to the arduino uno board and read its data in matlab ? please help.

[jawherferid]

please the link of the arduino package you have used

[ahsin.shabbir]

I keep getting the error "the input buffer was filled before the Terminator was reached".
Error in Testing_arduino (line 3)
a = arduino('COM3');

How can I fix this problem? I am using MATLAB R2012b