2006-2015 Lexus Alternator Replacement RX350, ES350, TOYOTA FWD V6 #AUTOMOTIVE #lexus #toyota

Показать описание

Alternator replacement on a 2007 RX350 but applies to all Lexus and Toyota FWD 2GR V6. Fast paced video so try to keep up. There are different ways people do this job but this is the fastest way I know of. May not be the easiest for a beginner but give it a shot if you like. Master it it and it will take you less than an hour! Thanks for watching. Any questions let me know!

Harbor Area Tech

Рекомендации по теме

Комментарии

Very educational. Appreciate your time and technique 👍👍

DJ-ghdg

Ive just done it, 7 hours total for an amateur, I confirm its doable without removing the radiator fan assembly, but very hard to get the alternators in and out this way. Crucial tips not mentioned in the video: 1. remove black plastic pins from the bumper's top side, near to the both sides of the front radiator, it will make possible to tilt the radiators even more towards the front of the car. 2. Remove exhaust metal front shield (3 screws 10mm), move the shield to the side, without removing the o2 sensor. 3. Ask somebody to pull the radiators towards the cars' front while trying to maneuver the alternator, you need absolute maximum radiator movement possible (not sure what is the construction limit though, gotta feel it)

elhau

Masterpiece diy tutorial video all the way through, thanks!

elhau

Great video! I'm planning to undertake it tomorrow. I'm pretty experienced and aiming for 2hrs or less, changing the alternator, an idler pulley, and the belt. I'll be sure to review this again and have it at the ready.

stephendunham

I really like the style, on screen text, detailed shoots, That's a good Video! Keep going! Dont stop posting!

Makhnovets

Mad props bro, thats a clever way to do the job!!

redeemedheathen

Awesome video format! unfortunately I’ve been trying to get out the alternator out for 3 hrs now I have the wood in there and it just seems impossible wish you could of shown us how you did it. I’m giving up on and I’m removing the fan assembly 😅 to get it out

jhb

Hey what is a service bolt & where do I get it?? Or do I just insert any bolt when I’m loosening the drive belt?

TripleThreatJYt

Do we have to remove the whole battery instead of disconnecting the negative? Some videos show to disconnect battery not remove it.

michaelho

you dont need rear atl bracket its overkill from toyota just like a intake manifold rear brackets the bracket is not for support it's mainly there to hold the wire harness.the upper and lower bolt hold the alternator in place the camrys and corollas have the same set up but no rear bracket ! and you dont have to unbolt horns / just unplug all your doing is pulling radiator support forward a few inches and use a 4x4 piece of wood if you want more room unbolt condensor and pull it forward and out of slots and pull up on radiator then push forward

mronemanband