Touch Screen on Chrysler 300 C Not Working? Let's Fix iT for $35!

Touch Screen on Chrysler 300 C Not Working?

Touch Screen on Chrysler 300 C Not Working? This video will guide you step by step on what's wrong and how to replace the digitizer screen for your Chrysler 300 C. See the video chapters below for references.

Video Chapters:
00:00 Intro.
00:19 Remove Paneling.
00:39 Remove 4 Screws Holding the Touch Screen to Your Car.
00:56 Unplug the Wired Connectors on the Back of the Touch Screen.
01:07 Remove 6 Screws Holding the Touch Screen.
01:17 Remove the Metal Frame Around the Touch Screen.
01:36 Gently Remove both Ribbon Cables.
02:10 Use a Razor to Separate Digitizer from Screen.
02:39 Remove the Plastic Film on New Touch Screen.
03:08 Place the Digitizer Evenly on the Screen.
03:25 Attach the Screen to the Housing.
03:54 Put the Screws Back On, then The Metal Frame.
04:14 Reconnect Wires and Mount the Touch Screen.
04:24 Reconnect Clock, Vents, and Control Panel.

Want to see more videos like this one? You ROCK!

#DIY #LetsFixiT

Camera / Tool Gear:
*above are affiliate links that support this channel.

The creator of this content has an Associate Degree in Electrical Maintenance and has been trained by professionals. These videos are not a guarantee on how to fix something and you assume all the risk when you take it upon yourself to solve a problem.

BE SAFE!
And always remember,
Jesus loves YOU!
And only He can solve your biggest problem!

[EricSimard-ik]

GREAT video! No annoying, ridiculous music. No useless chatter. Just the relevant information presented step by step from beginning to end. Thank you for this.

[coachsaldana]

This is the best "How To" video of this process on Youtube! No one even close. Thank you

[deniswauchope]

Thanks for that clear, concise, well presented guide! I'm doing this same job on my 2012 200S, and you covered everything I needed to know.

[MISCDesigns]

Dude I accidentally let go at the step on 1:07 and it was a whole b*tch getting the screws back into place. Luckily, I was able to apply the new screen successfully. Thank you for this tutorial.

[JodiSharp-el]

Will this screen and how to video work with a 2017 Chrysler 300 S???

[IRONSIDES]

Great video, getting the glue off was a pain.
Other than that it went pretty smoothly.
You did a really good job on breaking it down to keep it manageable.

[bo]

If the black cable came loose where does it go need help asap

[nmproud]

Thank you Rick worked like a charm. They wanted to charge me 280.00 to do what you showed us.

[marcisaacs]

What size is the screen in inches and could it work for a Subaru 8” in a 2019 legacy?

[georgethorn]

Thank you Fix iT Rick. I got quoted $800.00 - $1, 100.00 to replace the unit. $35.00 - $800..00 = $765.00 in savings! Time and effort after receiving the digitizer took no more than 1 hour. You Da Man! Jesus Christ loves you too sir! But you already knew that! Amen.

[RalphPurificato]

Thank You again Fix it Rick, I sent the first one back and put the second one in, in about 20 minutes. And it works. I may have left some protective film on the sides the first time or it was defective. All fixed for about 29 dollars.

[andrewmarquez]

If the inside of my radio comes out, is there a video i can use for this? It is a pain and i cant find anything on it

[BGViews]

Thank you! Had to replace the screen on my 2017 Chrysler 300C. Replaced the display after that when I encountered some issues with areas not responding to my touch. I managed to shake loose the tiny cylinders in the housing which was no fun, but not impossible to get back in place. Display works like a charm now, got it done for under $200.

By the way, that goo they use should be illegal. Spent more time cleaning it off my hands than replacing the screen 😂

[SecularGuy]

My Brother's 300 has the same exact moisture line on the top except his presses all the controls erratically without him even touching the screen. This video is exactly what we needed, thank you so much!

[fatdiccjeremiah]

So we replaced it but now im having a dark moon pop up as we start my 300 up? like as if the screen is shattered

[larrywinston]

Thank you so much. I didn`t need to replace the anything. I imagine most just need to clean the screens, to rid them of all of that gooey glue and replace them. One tip, If I may. Instead of using alcohol, simply apply "peanut butter" to the glue, wait 2 minutes and simply scrape the residue off with a butter or steak knife (with the intentions of not scratching the glass), then dishwashing liquid, then alcohol, or glass cleaner to finish up (that whole process will take minutes, not hours.

[psychocycledad]

I have a 2012 Chrysler 200 with the same issue. Thank you for the video and the link. Im going to try this out.

[Martinezx]

I have an early 2012 Chrysler 300. I bought a 8.4 touch screen of a 2013 and when I plug it in it’s just black. Would replacing the screen be okay ? Any programing ?

[JosephValenti]

Mine is randomly clicking, like touch still works but it still has that seperation that looked similar in this video - is the digitizer starting to seperate the likely culprit of this ?

[aaronspradlin]

So just to be clear, I ordered the new screen to fix this, my issue was it not responding to my touch and randomly clicking and glitching stuff! This new screen will fix that correct or is that something in the radio?